--- title: "Cable the Monitoring ports" slug: "cable-the-monitoring-ports-1" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T11:19:16Z published: 2026-09-17T11:19:16Z canonical: "docs.trellix.com/cable-the-monitoring-ports-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Cable the Monitoring ports This procedure describes how to cable a Sensor to run in In-line mode. 1. Plug the cable appropriate for use with your transceiver module into one of the Monitoring ports labeled x (for example, 1). ![GUID-4113CB50-A1DB-498A-9A84-B6141F658DFB-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ab65b488-05d6-4a78-f8a1-fa9fdd2c5141.png?sv=2026-02-06&spr=https&st=2026-11-20T09%3A24%3A38Z&se=2026-11-20T10%3A24%3A38Z&sr=c&sp=r&sig=nmaeNsxP3ofMOVwcJGIS5gIigEDXCaBkpjLLetFn%2BHQ%3D) 2. Plug the cable appropriate for use with your transceiver module into one of the Monitoring ports labeled y (for example, 2). 3. Connect the other end of each cable to the network devices that you want to monitor. For example, if you plan to monitor traffic between a switch and a router, connect the cable connected to 1 to the router (3) and the one connected to 2 to the switch (4).