--- title: "Central Management appliance cannot communicate with Helix" slug: "central-management-appliance-cannot-communicate-with-helix" tags: ["Integration", "Helix", "Sec Ops and Analytics"] updated: 2026-09-02T19:14:07Z published: 2026-09-02T19:14:07Z canonical: "docs.trellix.com/central-management-appliance-cannot-communicate-with-helix" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Central Management appliance cannot communicate with Helix **Problem** The managing Trellix Helix-enabled Central Management System appliance cannot communicate with Trellix Helix. **Reason** The following are probable reasons for the problem: - The Central Management System appliance is not configured to use DTI connection settings, such as HTTP proxy settings. - The alert ingestion URI is not allowed. - The Central Management System appliance is behind a Network Address Translation (NAT) device that managed appliances cannot reach. - The Central Management System appliance is using SSL decryption on the connection to Trellix Helix and a Web proxy gateway such as Blue Coat does not allow access to the alert ingestion URI. - The alert ingestion URI has not been registered correctly. **Action** To correct the problem: - Run the `show fenotify integ helix` command and verify that the `apply-fenet-settings` field is `true`. If it is not, run the `fenotify integ helix apply-fenet-config enable` command. - Add the alert ingestion URI described in Network requirements to an allowed list. - If your Central Management System appliance is behind a NAT device or a Web proxy gateway, allow access to the alert ingestion URI described in Network requirements. - If the other actions do not solve the problem, contact Trellix Technical Support to manually set the alert ingestion URI.