--- title: "Change Sensor mode from Suricata to IPS" slug: "change-sensor-mode-from-suricata-to-ips" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/change-sensor-mode-from-suricata-to-ips" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Change Sensor mode from Suricata to IPS Follow these steps to convert a Suricata Sensor to an IPS Sensor: **Steps:** 1. Delete the Sensor from the Manager (if applicable): If the Sensor was previously configured, delete it from the Manager interface. 2. Change the mode to IPS: Run the CLI command to change the Sensor mode to **IPS**. For more information, see *Configure Sensor information*. 3. Reset the configuration: Run the `resetconfig` command to clear the previous configuration. > [!TIP] > Tip > > The `resetconfig` command includes an implicit Sensor reboot. 4. Add the Sensor to the Manager: Add the Sensor to the Manager. For more information, see *Add a Suricata Sensor as a standalone to the Manager* or *Add a Suricata Sensor as a stack to the Manager*.