--- title: "Change the active certificate for the Sensor" slug: "change-the-active-certificate-for-the-sensor" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:08Z published: 2026-10-05T15:40:08Z canonical: "docs.trellix.com/change-the-active-certificate-for-the-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Change the active certificate for the Sensor To change the active certificate for a Sensor, perform the following steps: ## Task 1. Go to **Devices** → **** → **Devices** → **** → **Setup** → **Certificates**. 2. In the **Certificate Status** section, click **Change Active Certificate** drop down. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-9E8777C2-20EB-4803-B83E-270CEA8638CC-low(1).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A46%3A41Z&se=2026-11-20T12%3A46%3A41Z&sr=c&sp=r&sig=9lu5VBWcf3u1EH7nNhsWBmZCRnEWUAPuGeXnS1bV38c%3D) 3. Select the certificate (self-signed or CA-signed) based on your requirement. 4. Click **OK** to confirm. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-B48E035A-8ACA-4FE8-8988-8367D714C8E0-low.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A46%3A41Z&se=2026-11-20T12%3A46%3A41Z&sr=c&sp=r&sig=9lu5VBWcf3u1EH7nNhsWBmZCRnEWUAPuGeXnS1bV38c%3D) 5. Click **OK** to change the active certificate. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-E954A747-1335-48E2-B67F-E68121029286-low.png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A46%3A41Z&se=2026-11-20T12%3A46%3A41Z&sr=c&sp=r&sig=9lu5VBWcf3u1EH7nNhsWBmZCRnEWUAPuGeXnS1bV38c%3D) > [!NOTE] > Note > > If your Manager is part of an MDR pair, you can change the certificate from self-signed to CA-signed or vice versa only for the primary (active) Manager.