--- title: "Changing alert levels" slug: "changing-alert-levels" updated: 2026-08-24T20:40:19Z published: 2026-08-24T20:40:19Z canonical: "docs.trellix.com/changing-alert-levels" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Changing alert levels As described in [Viewing cluster utilization](/network-and-platform/docs/viewing-cluster-utilization), by default warning alerts are generated when the cluster utilization reaches 60% of capacity, and critical alerts are generated when the cluster utilization exceeds 85% of capacity. You can change the levels at which warning and critical alerts will be generated. The warning level cannot be set to a higher value than the critical level. ##### To change the warning level: 1. Log in to the Central Management CLI. 2. Go to CLI configuration mode: ```plaintext cm-hostname > enable cm-hostname # configure terminal ``` 3. Specify the percentage: ```plaintext cm-hostname (config) # cmc mvx status cluster-sizing threshold warning ``` where `percentage` can be a value from 10–90 and must be less than the "critical" percentage. 4. Verify your change: ```plaintext cm-hostname (config) # show cmc mvx status cluster-sizing config ``` 5. Save your change: ```plaintext cm-hostname (config) # write memory ``` ##### To change the critical level: 1. Log in to the Central Management CLI. 2. Go to CLI configuration mode: ```plaintext cm-hostname > enable cm-hostname # configure terminal ``` 3. Specify the percentage: ```plaintext cm-hostname (config) # cmc mvx status cluster-sizing threshold critical ``` where `percentage` can be a value from 20–100 and must be a greater than the "warning" value. 4. Verify your change: ```plaintext cm-hostname (config) # show cmc mvx status cluster-sizing config ``` 5. Save your change: ```plaintext cm-hostname (config) # write memory ``` **Example** The following example changes the warning level to 75% of total capacity. ```plaintext cm-1 (config) # cmc mvx status cluster-sizing threshold warning 75 cm-1 # show cmc mvx status cluster-sizing config MVX Cluster Sizing Configurations: Enabled                           : yes Utilization Warning Threshold     : 75% Utilization Critical Threshold    : 95% ```