--- title: "Changing an AWS instance type" slug: "changing-an-aws-instance-type" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/changing-an-aws-instance-type" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Changing an AWS instance type You can change the size of a Network Security or Central Management System instance if you determine that is over-utilized because it is too small, or under-utilized because it is too large. ### Important After you change a Network Security instance type, you must reboot the instance twice for the change to take effect. To change the AWS instance type: 1. Log in to the EC2 console. 2. Stop the instance: 1. Select **Instances** in the navigation pane. 2. Right-click the instance and select **Stop instance**. 3. Change the instance type: 1. Right-click the instance. 2. Select **Instance settings** > **Change instance type**. 3. Select the new instance type and click **Apply**. 4. Start the instance: - Right-click the instance and select **Start instance**. 5. Reboot the instance: 1. Right-click the instance and select **Reboot instance**. 1. Wait for the instance state to be **Running**. 6. (*Network Security* *instances only*) Reboot the instance again: ### Important This step is mandatory because two reboots are needed for the change to take effect. 1. Log in to the Network Security CLI. 2. Reboot the instance: ``` hostname (config) # reload                     ``` :