--- title: "Changing global active DTI settings for managed appliances using the CLI" slug: "changing-global-active-dti-settings-for-managed-appliances-using-the-cli-5" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-09-07T20:58:07Z published: 2026-09-07T20:58:07Z canonical: "docs.trellix.com/changing-global-active-dti-settings-for-managed-appliances-using-the-cli-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Changing global active DTI settings for managed appliances using the CLI Use the commands in this section to change global active DTI settings for the appliances that are managed by a Central Management System appliance. **To change global active DTI settings:** 1. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. View the current active and available DTI sources. `hostname (config) # show fenet dti configuration` 3. To change the active global `source` setting: 1. Specify the active setting: `hostname (config) # fenet dti source managed {DTI | CDN | CMS}` 2. Apply the setting to all managed appliances: `hostname (config) # fenet dti source managed-sync` 4. To change the active global `upload destination` setting: 1. Specify the active setting: `hostname (config) # fenet dti upload destination managed {DTI | CMS}` 2. Apply the setting to all managed appliances: `hostname (config) # fenet dti upload destination managed-sync` 5. To change the active global setting for the `mil`, `faude`, `avsuite`, `helix`, or `virtual` service: 1. Specify the active setting: `hostname (config) # fenet dti <service> service managed {DTI | CMS}` 2. Apply the setting to all managed appliances: `hostname (config) # fenet dti <service> service managed-sync` 6. Verify your changes: `hostname (config) # show fenet dti configuration` 7. Save your changes: `hostname (config) # write memory` ### Examples In this example, the active setting for the download source is changed to `DTI` for the appliances that are managed by this Central Management System appliance. ``` hostname (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:     Mode               :  online     Download source    :  CDN (DTIUser@cloud.fireeye.com)     Upload destination :  DTI (DTIUser@up-staticcloud.fireeye.com)     ... ``` ```  ACTIVE SETTINGS FOR MANAGED APPLIANCES:     Download source    :  CMS     Upload destination :  CMS     ...  AVAILABLE OPTIONS:  --------------------------------------------------------------  Download    User                     Address  --------------------------------------------------------------  CDN         DTIUser                  cloud.fireeye.com  CMS         DTIUser                  10.2.3.4    DTI         DTIUser                  staticcloud.fireeye.com  --------------------------------------------------------------  ... hostname (config) # fenet dti source managed DTI hostname (config) # fenet dti source managed-sync hostname (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:     Mode               :  online     Download source    :  CDN (DTIUser@cloud.fireeye.com)     Upload destination :  DTI (DTIUser@up-staticcloud.fireeye.com)       ...        ACTIVE SETTINGS FOR MANAGED APPLIANCES:         Download source    :  DTI     Upload destination :  CMS     ... ```