--- title: "Changing the active settings for DTI services using the CLI" slug: "changing-the-active-settings-for-dti-services-using-the-cli-1" tags: ["File Protect (FX)", "Product Usage"] updated: 2026-09-08T23:38:14Z published: 2026-09-08T23:38:14Z canonical: "docs.trellix.com/changing-the-active-settings-for-dti-services-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Changing the active settings for DTI services using the CLI Use the commands in this section to change the active source setting on a standalone appliance or to change the active setting for any DTI service on a managed appliance. ### Changing the active source on a standalone appliance To change the active source setting: 1. Go to CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. View the current active and available DTI sources: `hostname (config) # show fenet dti configuration` 3. Change the active download source: `hostname (config) # fenet dti source default {CDN | DTI}` 4. Verify your change: `hostname (config) # show fenet dti configuration` 5. Save your change: `hostname (config) # write memory` ### Changing the active settings for DTI services on a managed appliance If the Central Management System appliance controls the active setting for a DTI service, you must move control to the managed appliance before you change the setting. Otherwise, the Central Management System appliance will maintain control and use the setting it uses for managed appliances. To change the active setting: 1. Go to CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. View the current active and available DTI servers: `hostname (config) # show fenet dti configuration` 3. If the` ACTIVE SETTINGS `value includes` Managed by CMS`, move control of the setting to the managed appliance: - To move control of the download` source` setting: `hostname (config) # no fenet dti source override enable` - To move control of the` upload destination` setting: `hostname (config) # no fenet dti upload destination override enable` - To move control of the` mil`,` faude`,` avsuite`,` helix`, or` virtual `service setting: `hostname (config) # no fenet dti <service> service override enable` 4. Change the setting: - To change the download` source` setting: `hostname (config) # fenet dti source default {CDN | DTI | CMS}` - To change the` upload destination` setting: `hostname (config) # fenet dti upload destination default {DTI | CMS}` - To change the` mil`,` faude`,` avsuite`,` helix`, or` virtual `service setting: `hostname (config) # fenet dti <service> service default {DTI | CMS}` 5. Verify your changes: `hostname (config) # show fenet dti configuration` 6. Save your changes: `hostname (config) # write memory` ### Note To move control of the active setting for a DTI service back to the Central Management System appliance, use the following commands: - `fenet dti source override enable` - `fenet dti upload destination override enable` - `fenet dti <service> service override enable` ### Examples In this example, the active download source on a standalone appliance is changed from **DTI** to **CDN**. ``` hostname (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:     Mode               :  online     Download source    :  DTI (DTIUser@staticcloud.fireeye.com)     ...  AVAILABLE OPTIONS:  --------------------------------------------------------------  Download    User                     Address  --------------------------------------------------------------  CDN         DTIUser                  cloud.fireeye.com    DTI         DTIUser                  staticcloud.fireeye.com  ...  -------------------------------------------------------------- ``` ``` hostname (config) # fenet dti source default CDN hostname (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:     Mode               :  online     Download source    :  CDN (DTIUser@cloud.fireeye.com)     ... ``` In this example, the active download source on a managed appliance is changed from` CMS `to` DTI`. ``` hostname (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:  ACTIVE SETTINGS:     Mode               :  online     Download source    :  CMS (DTIUser@10.2.3.4) - Managed by CMS     Upload destination :  CMS (DTIUser@10.2.3.4) - Managed by CMS     ... hostname (config) # no fenet dti source override enable hostname (config) # fenet dti source default DTI hostname (config) # show fenet dti configuration DTI CLIENT CONFIGURATIONS:    ACTIVE SETTINGS:    Mode               : online    Download source    : DTI (DTIUser@staticloud.fireeye.com) - Managed by Appliance    Upload destination : CMS (DTIUser@10.2.3.4) - Managed by CMS    ... ``` :