--- title: "Changing the status of your own local user account using the CLI" slug: "changing-the-status-of-your-own-local-user-account-using-the-cli-1" tags: ["File Protect (FX)", "Malware Analysis (AX)", "IAM", "Email Security - Cloud", "Network Security (NX)", "Email Security — Server", "Central Management System", "Helix Enterprise", "Endpoint Security (HX)", "Product Usage", "Install and Get Started", "Helix", "Intelligent Virtual Execution "] updated: 2026-09-01T19:03:12Z published: 2026-09-01T19:03:12Z canonical: "docs.trellix.com/changing-the-status-of-your-own-local-user-account-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Changing the status of your own local user account using the CLI Use the CLI commands in this topic to changing your own local user account status. ### Caution Although you can change your own user account with a Monitor, Analyst, or Auditor role, you cannot save the changes to memory. Your changes could be lost if an administrator reboots without saving changes or reverts to the last saved configuration. Prerequisites - Any role To change your own local account status: 1. Log in to the CLI as yourself. 2. Go to CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 3. To change your local account status: - Specify that you cannot log in to the appliance locally using a password, but can do so using an SSH authorized key. Use the following command: `username <username> disable login` ### Note If your role is Monitor, Analyst, or Auditor, the CLI session will end immediately after you run this command. - Specify that you cannot log in to the appliance locally, but can log in remotely. Use the following command: `username <username> disable local-login` 4. (Operator role only) Save your changes: ``` hostname (config) # write memory ``` :