--- title: "Checking status and health of managed appliances using the CLI" slug: "checking-status-and-health-of-managed-appliances-using-the-cli-2" updated: 2026-08-25T21:18:10Z published: 2026-08-25T21:18:10Z canonical: "docs.trellix.com/checking-status-and-health-of-managed-appliances-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Checking status and health of managed appliances using the CLI Use the commands in this section to check the status and health of managed appliances. To view status: 1. Go to CLI enable mode: ``` hostname > enable ``` 2. View status: - To view high-level status of all appliances: ``` hostname # show cmc appliances brief ``` - To view health check criteria and detailed status information: ``` hostname # show cmc status ``` - To view the connection status of all appliances: ``` hostname # show cmc appliances ``` - To view comprehensive information about a specific appliance: ``` hostname # show cmc appliances ``` - To view comprehensive information about all appliances: ``` hostname # show cmc appliances detail ``` ### Note You can also run Network Security network deployment checks using the` cmc execute appliance <NXApplianceName> command deployment check `commands. For details, see the *Network Security System Administration Guide*. ### Examples ###### show cmc appliances brief This example shows that three appliances are enabled for Central Management System management, one appliance is disconnected, and two appliances failed status checks. ``` hostname # show cmc appliances brief Appliance          Address      Enabled   Connected  Health   Product ---------          -------      -------   ---------  ------   ------- ex-03              172.30.1.1   yes       no         CRIT     eMPS nx-02              172.70.1.1   yes       yes        ok       wMPS fx-04              172.20.1.1   yes       yes        WARN     fMPS nx-01              172.70.2.1   yes       yes        ok       wMPS nx-05              172.40.1.1   yes       yes        ok       wMPS ``` ###### show cmc status This example shows the status check settings and criteria, and then shows the status of each appliance that can be managed by this Central Management System appliance. ``` hostname-01 # show cmc status Status checking enabled:  yes Check interval:           60 seconds Timeout:                  30 seconds Status criteria:   "alive" test enabled:           yes   "content-key" test enabled:     yes   "disk_space" test enabled:      yes   "eula" test enabled:            yes   "fan" test enabled:             yes   "feature: test enabled:         yes   "power_supply" test enabled:    yes   "product_key" test enabled:     yes   "raid" test enabled:            yes   "support_key" test enabled:     yes   "temperature" test enabled:     yes   "user_role" test enabled:       yes Appliance ex-03: Last checked:               2014/12/23 21:28:02 Connected at last check:    no Replied to last check:      no Last check succeeded:       no Failed checks:   alive failed   content_key failed   disk_space failed   eula failed   fan failed   feature failed   power_supply failed   product_key failed   raid failed   support_key failed   temperature failed   user_role failed Appliance nx-02: Last checked:               2014/12/23 21:28:02 Connected at last check:    yes Replied to last check:      yes Last check succeeded:       yes Appliance fx-04: Last checked:               2014/12/23 21:28:02 Connected at last check:    yes Replied to last check:      yes Last check succeeded:       no Failed checks:   content_key failed ``` ###### show cmc appliances This example displays the status of each appliance that can be managed by this Central Management System appliance. In this case, the Network Security appliance initiated the request to be managed, the Email Security — Server appliance is not currently connected, and the Central Management System appliance initiated the connection between itself and the File Protect appliance. ``` hostname # show cmc appliances Appliance nx-02:   Address:                   172.70.1.1   Enabled:                   yes   Connected:                 yes (client-initiated)   Status check OK:           yes   Version compatible:        yes Appliance ex-03:   Address:                   172.30.1.1   Enabled:                   yes   Connected:                 no   Status check OK:           no   Version compatible:        unknown Appliance fx-04:   Address:                   172.20.1.1   Enabled:                   yes   Connected:                 yes (server-initiated)   Status check OK:           no   Version compatible:        yes ``` ###### show cmc appliances This example displays the status and settings for the nx-02 appliance. The Central Management System appliance initiated the connection with the appliance. ``` hostname # show cmc appliances nx-02 Appliance nx-02 Connection status:   Connected:                    yes (server-initiated)   Connection failure reason:    None   Connection last formed:       2014/12/23 21:13:37       Connection last broken:       2014/12/23 21:13:36   Last connection attempt:      2014/12/23 21:13:36   Next connection attempt:   Current time:                 2014/12/23 21:25:36   Status check OK:              yes   Server username on client:    admin   Client username on server:    cmcclient Appliance Status:   Client software version:      wMPS (wMPS) 7.7.0.420682   Client product name:          wMPS Power             Client software match:        no   Client software compatible:   yes   Appliance ID:                 002590AEE884   Product model:                FireEyeNX900   Content version:              432-lb.198   Content channel:              stable   Content sharing type:         all Configuration:   Enabled:                  yes   Address:                  172.10.0.0   SSH port:                 22   Web UI protocol:          http   Web UI HTTP port:         9023 (active)   Web UI HTTPS port:        443   Auto-connect:             yes   Status check enabled:     yes   Client requests enabled:  yes   Comment:   Authentication:      Authentication type:   password      password username:     admin      password password:     ********      ssh-dsa2 username:     admin      ssh-dsa2 identity:      ssh-rsa2 username:     admin      ssh-rsa2 identity:   Validation for client-initiated connections:   Source address:          (same as main address)   Source port:             (no restriction)   ``` ###### show cmc appliances detail The` show cmc appliances detail `command output is the same as the` show cmc appliances <applianceID> `command output, except it displays information about all managed appliances, not just one. :