--- title: "Checking system health using the CLI" slug: "checking-system-health-using-the-cli-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:26Z published: 2026-08-24T20:40:26Z canonical: "docs.trellix.com/checking-system-health-using-the-cli-4" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Checking system health using the CLI Use the CLI commands in this topic to view health and status information about Intelligent Virtual Execution - Server appliance components. This topic describes selected commands that return system, hardware status, DTI network, and interface information. For a full list of commands and details about their usage and parameters, see the *CLI Command Reference*. - Monitor, Operator, or Admin access - Admin access for the `show ipmi` command > [!NOTE] > Note > > The examples in this section are from a Network Security appliance, but they are representative of Trellix appliances as well. **To check appliance health:** 1. Go to CLI enable mode: ``` hostname > enable ``` 2. Display detailed information about the system and the software running on it. ``` hostname (config) # show version Product name:      VX [licensed] Product model:     FireEyeVX5500 Product release:   VX (VX) 7.9.0.478838 Build ID:          #478838 Build date:        2016-07-16 21:28:16 Build arch:        x86_64 Built by:          root@vta412 Version summary:   vx VX (VX) 7.9.0.478838 #478838 2016-07-16 21:28:16 x86_64 build@vta412:FireEye/7.9.x-inyo (eng) Content Version:   380.471 ``` ``` Appliance ID:      nnnnnnnnnnnn Host ID:           nnnnnnnnnnnn System serial num: nnnnnnnnnnnn System UUID:       nnnnnnnn-nnnn-nnnn-nnnn-nnnnnnnnnnnn ``` ``` Uptime:            1h 8m 16.420s CPU load averages: 0.26 / 0.15 / 0.15 Number of CPUs:    8 System memory:     1736 MB used / 62804 MB free / 64540 MB total Swap:              0 MB used / 65536 MB free / 65536 MB total ``` 3. Display the IPMI configuration: ``` hostname # show ipmi IPMI LAN Settings ---------------------------------------- Admin Shut Down         : no Shut Down               : no IP Address Source       : Static Address IP Address              : 10.11.57.18 Subnet Mask             : 255.255.255.0 Default Gateway IP      : 10.11.57.1 ``` ``` IPMI Firmware Installed ------------------------------- Firmware Version:         2.67 Device:                   1 IPMI Version:             2.0 ``` ``` IPMI Firmware Available For Update -------------------------------------------------------------------------- New Firmware Version:     2.68 New Firmware Filename:    FireEye_V268.bin Firmware Update Notice:    IPMI firmware version 2.68 is available and recommended with this release.    Check your current release notes for security fixes and update advisories ``` ```    The new version may be installed with the CLI command:        ipmi firmware update latest ``` ```    Important notes: * Refer to the user manual for general IPMI upgrade guidance * Disruption of power during upgrade may result in system failure * IPMI network and password settings and IPMI logs revert to factory defaults on upgrade * Microsoft Desktop is the only officially supported IPMI browser environment * In some cases a hardware cold power down might be required after upgrade ``` 4. Display overall system status: ``` hostname * show system health Overall system feature status: Good ``` 5. Display information about the Dynamic Threat Intelligence (DTI) network: ``` hostname # show fenet status ``` ``` Dynamic Threat Intelligence Service: ``` ```    Update source   :    Enabled         : yes      Download        : DTIUser@cloud.fireeye.com      Upload          : DTIUser@up-cloud.fireeye.com    Mil             : DTIUser@mil-cloud.fireeye.com  HTTP Proxy: ``` ```     Address        :     Username       :     User-agent     : ``` ``` Request Session: ``` ```     Timeout        : 30       Retries        : 3     Speed Time     : 60     Max Time       : 14400     Rate Limit     :     Speed Limit    : 1   Dynamic Threat Intelligence Lockdown: ``` ``` Enabled             : no Locked              : no Lock After          : 5 failed attempts ``` ``` UPDATES                    Enabled   Notify  Scheduled   Last Updated At                    -------   ------  ---------   ------------------- Security contents: yes       no      every       2016/07/18 19:28:00 Stats contents:    yes               none        2016/07/18 15:55:00 ``` 6. Display status and traffic statistics for all interfaces: ``` hostname # show interfaces Interface ether1 status:   Comment:   Admin up:           yes   Link up:            yes   DHCP running:       no   IP address:         10.11.121.18   Netmask:            255.255.255.0   IPv6 enabled:       no   Speed:              1000Mb/s (auto)   Duplex:             full (auto)   Interface type:     ethernet   Interface ifindex:  4   Interface source:   physical   MTU:                1500   HW address:         0C:C4:7A:31:C5:F8 ``` ``` RX bytes:           1134539880          TX bytes:       12422478   RX packets:         811980              TX packets:     127113   RX mcast packets:   0                   TX discards:    0   RX discards:        0                   TX errors:      0   RX errors:          0                   TX overruns:    0   RX overruns:        0                   TX carrier:     0   RX frame:           0                   TX collisions:  0                                           TX queue len:   1000 ``` ``` Interface ether2 status:   Comment:   Admin up:           no   Link up:            no   DHCP running:       no   IP address:   Netmask:   IPv6 enabled:       yes   Autoconf enabled:   yes   Autoconf route:     yes   Autoconf privacy:   no   DHCPv6 running:     no   Speed:              (null)   Duplex:             (null)   Interface type:     ethernet   MTU:                1500   HW address:         0C:C4:7A:31:C5:F9 ``` ``` RX bytes:           0                   TX bytes:       0   RX packets:         0                   TX packets:     0   RX mcast packets:   0                   TX discards:    0   RX discards:        0                   TX errors:      0   RX errors:          0                   TX overruns:    0   RX overruns:        0                   TX carrier:     0   RX frame:           0                   TX collisions:  0                                           TX queue len:   1000 ``` ``` Interface ether3 status:   Comment:   Admin up:           yes   Link up:            no   DHCP running:       no   IP address:   Netmask:   IPv6 enabled:       yes   Autoconf enabled:   yes   Autoconf route:     yes   Autoconf privacy:   no   DHCPv6 running:     no   Speed:              UNKNOWN   Duplex:             UNKNOWN   Interface type:     ethernet   Interface ifindex:  2   Interface source:   physical   MTU:                1500   HW address:         00:1B:21:7F:6F:A2 ``` ``` RX bytes:           0                   TX bytes:       0   RX packets:         0                   TX packets:     0   RX mcast packets:   0                   TX discards:    0   RX discards:        0                   TX errors:      0   RX errors:          0                   TX overruns:    0   RX overruns:        0                   TX carrier:     0   RX frame:           0                   TX collisions:  0                                           TX queue len:   1000 ``` ``` Interface ether4 status:   Comment:   Admin up:           yes   Link up:            no   DHCP running:       no   IP address:   Netmask:   IPv6 enabled:       yes   Autoconf enabled:   yes   Autoconf route:     yes   Autoconf privacy:   no   DHCPv6 running:     no   Speed:              UNKNOWN   Duplex:             UNKNOWN   Interface type:     ethernet   Interface ifindex:  3   Interface source:   physical   MTU:                1500   HW address:         00:1B:21:7F:6F:A3 ``` ``` RX bytes:           0                   TX bytes:       0   RX packets:         0                   TX packets:     0   RX mcast packets:   0                   TX discards:    0   RX discards:        0                   TX errors:      0   RX errors:          0                   TX overruns:    0   RX overruns:        0                   TX carrier:     0   RX frame:           0                   TX collisions:  0           TX queue len:   1000 ```