--- title: "Checking the status of device sensors" slug: "checking-the-status-of-device-sensors-6" tags: ["Malware Analysis (AX)", "AX 10.x", "Product Usage"] updated: 2026-09-07T21:07:57Z published: 2026-09-07T21:07:57Z canonical: "docs.trellix.com/checking-the-status-of-device-sensors-6" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Checking the status of device sensors This procedure describes how to use the IPMI interface to check the status of the AX appliance sensors. Prerequisites - You are logged in to the appliance IPMI. To check the status of server sensors: 1. Click the **Server Health** tab. 2. Click **Sensor Readings** in the sidebar. ![All_IPMISensor_scap.PNG](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b5b8749a-cdf0-b0e1-14a4-77090329b28b(10).png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A20%3A25Z&se=2026-11-20T07%3A20%3A25Z&sr=c&sp=r&sig=zfTK3wKOUvOip4XIr%2BSGn22mFrK4nYrq6UqmOEQSumc%3D) 3. Click options at the bottom of the page as needed: - **Refresh** - **Show Thresholds** - **Intrusion Reset** :