--- title: "checkmanagerconnectivity" slug: "checkmanagerconnectivity-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:40Z published: 2026-11-19T12:29:40Z canonical: "docs.trellix.com/checkmanagerconnectivity-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # checkmanagerconnectivity This command checks the connectivity between the Sensor and the Manager and displays the following status information: - Alert channel - Packet log channel - Authentication channel For any of the above, if the status is displayed as `down`, it additionally displays the steps for troubleshooting the connectivity. **Syntax:** `checkmanagerconnectivity` **Sample Output:** `intruShell@john> checkmanagerconnectivity` `[Manager Trust]` `Trust Established : Yes` `[Manager Communications]` `IP Connection : Pass` `Alert Channel : down` `Log Channel : up` `Authentication Channel : up` `[Manager Port Reachability]` `Install TCP Port 8501 : OPEN` `Alert TCP Port 8502 : OPEN` `Logging TCP Port 8503 : OPEN` > [!NOTE] > Note > > The `[Manager Port Reachability]` section in the `checkmanagerconnectivity` command output lists the port status related to the Manager and Sensor communication. The `[Manager Port Reachability]` section lists **CA Signed cert** ports' status when the Manager and Sensor communication is using a CA-signed certificate; or else it will have **Self Signed cert** ports' status. **Applicable to:** NS-series Sensors **Troubleshooting tips:** - Reinitialize both the alert and log channels by executing the commands `disconnectalertandpktlogchannels` and `reconnectalertandpktlogchannels` at the CLI. - If the issue persists, capture the packets on the Sensor's management port and also in the Manager for further analysis.