--- title: "checkmanagerconnectivity" slug: "checkmanagerconnectivity" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:56Z published: 2026-10-05T15:40:56Z canonical: "docs.trellix.com/checkmanagerconnectivity" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # checkmanagerconnectivity This command checks the connectivity between the Sensor and the Manager and displays the following status information: - Alert channel - Packet log channel - Authentication channel For any of the above, if the status is displayed as down, it additionally displays the steps for troubleshooting the connectivity. **Syntax:** checkmanagerconnectivity **Sample Output:** intruShell@john> checkmanagerconnectivity [Manager Trust] Trust Established : Yes [Manager Communications] IP Connection : Pass Alert Channel : down Log Channel : up Authentication Channel : up [Manager Port Reachability] Install TCP Port 8501 : OPEN Alert TCP Port 8502 : OPEN Logging TCP Port 8503 : OPEN > [!NOTE] > Note > > The [Manager Port Reachability] section in the checkmanagerconnectivity command output lists the port status related to the Manager and Sensor communication. The [Manager Port Reachability] section lists **CA Signed cert** ports' status when the Manager and Sensor communication is using a CA-signed certificate; or else it will have **Self Signed cert** ports' status. **Applicable to:** NS-series Sensors **Troubleshooting tips:** - Reinitialize both the alert and log channels by executing the commands disconnectalertandpktlogchannels and reconnectalertandpktlogchannels at the CLI. - If the issue persists, capture the packets on the Sensor's management port and also in the Manager for further analysis.