--- title: "CIDR interface" slug: "cidr-interface-4" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:11Z published: 2026-11-19T12:28:11Z canonical: "docs.trellix.com/cidr-interface-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # CIDR interface When running a CIDR interface in SPAN mode, the Sensor uses the following logic to determine direction and VIDS ID: - When a SYN packet arrives on a SPAN port, the Sensor compares its CIDR sub-interfaces against the destination IP address in the SYN packet. - If there is a match, the entire flow is considered inbound and the Sensor stores the VIDS ID of the matched CIDR sub-interface. - If there is no match, the Sensor compares its CIDR sub-interfaces against the source IP address in the SYN packet. - If there is a match, the entire flow is considered outbound and the Sensor stores the VIDS ID of the matched CIDR sub-interface. - If there is no match, the entire flow is considered inbound and the Sensor stores the VIDS ID of the parent interface.