--- title: "CIDR interfaces definition" slug: "cidr-interfaces-definition" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:08Z published: 2026-10-05T15:40:08Z canonical: "docs.trellix.com/cidr-interfaces-definition" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # CIDR interfaces definition The first step to using a **CIDR** interface is to change the interface type from **Dedicated** to **CIDR**. The next step is to edit the interface and associate CIDR ranges with it. You'll want to define here all the internal CIDR ranges whose traffic you anticipate traversing this interface. The user interface expects CIDR ranges as a combination of IP network (or address) and mask length (in bits). In the figure, the 192.168.0.0/24 network has already been added to the list and the 10.0.0.0/8 network is about to be added. CIDR Interface window ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-AAD5EC56-6EF1-471C-BF47-FDF858CEE034-low.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A06%3A36Z&se=2026-11-20T14%3A06%3A36Z&sr=c&sp=r&sig=h8S3IJLLhJa4E7570%2FE3dNwdixJgSn6EFEijtATCHBU%3D) The figure below shows the results of the last step: Current CIDR range ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-D6587AA6-B16B-4C8B-A9D7-C642165B205D-low.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A06%3A36Z&se=2026-11-20T14%3A06%3A36Z&sr=c&sp=r&sig=h8S3IJLLhJa4E7570%2FE3dNwdixJgSn6EFEijtATCHBU%3D) If we look at the **Devices** → **** → **Devices** → **** → **IPS Interfaces** → **** → **Properties**, the interfaces and their corresponding policies, the **CIDR** interface will appear no different than the **Dedicated** interface it replaced. However, if we look back at the details of interface G3/1-G3/2, we can confirm at a glance that it is now associated with CIDR ranges 192.168.0.0/24 or 10.0.0.0/8. If traffic flows through interface G3/1-G3/2, with no source address on the 192.168.0.0/24 or 10.0.0.0/8 networks, the Default Prevention policy will no longer be applied. Instead, the traffic applied will be that of the parent (physical interface) and **not** the Sensor policies.