--- title: "clear afo dst-mac" slug: "clear-afo-dst-mac-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:40Z published: 2026-11-19T12:29:40Z canonical: "docs.trellix.com/clear-afo-dst-mac-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # clear afo dst-mac This command clears the previously configured destination MAC address on the specified port-pairs. > [!NOTE] > Note > > Upon clearing the configuration, when you execute the command [show afo status](/network-and-platform/docs/show-afo-status-3), the **AFO Destination MAC** column in the output will display the status of IFO-ACTIVE port-pair(s) as **Auto Detected**. If you plan to reconfigure the destination MAC address in the heartbeat packets sent by the Active Fail-Open (AFO) kit, you can use the command [set afo port-pair and dst-mac](/network-and-platform/docs/set-afo-port-pair-and-dst-mac-3). **Syntax:** `clear afo <port-pair | all> dst-mac` | Parameter | Description | | --- | --- | | | Set the port-pair for which the status is to be displayed. Valid port-pairs for NS9600, NS9500, NS7600, NS7500 Sensors are: g0/1-g0/2 \| g0/3-g0/4 \| g1/1-g1/2 \| g1/3-g1/4 \| g1/5-g1/6 \| g1/7-g1/8 \| g2/1-g2/2 \| g2/3-g2/4 \| g2/5-g2/6 \| g2/7-g2/8 \| g3/1-g3/2 \| g3/3-g3/4 \| g3/5-g3/6 \| g3/7-g3/8 Valid port-pairs for NS3600 Sensor are: 1-2 \| 3-4 \| 5-6 \| 7-8 \| 9-10 \| 11-12 \| 13-14 | | | Display the status of all the IFO-ACTIVE port-pairs. | **Example 1:** `intruShell@NS7500> clear afo g0/1-g0/2 dst-mac` The above command clears the destination MAC address configuration on port-pair g0/1-g0/2. **Example 2:** `intruShell@NS7500> clear afo all dst-mac` The above command clears the destination MAC address configuration on all the IFO-ACTIVE port-pairs. **Applicable to:** NS-series Sensors NS9600, NS9500, NS7600, NS7500, and NS3600.