---
title: "clear afo dst-mac"
slug: "clear-afo-dst-mac"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:40:56Z
published: 2026-10-05T15:40:56Z
canonical: "docs.trellix.com/clear-afo-dst-mac"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# clear afo dst-mac
This command clears the previously configured destination MAC address on the specified port-pairs.
> [!NOTE]
> Note
>
> Upon clearing the configuration, when you execute the command [show afo status](/network-and-platform/docs/show-afo-status), the **AFO Destination MAC** column in the output will display the status of IFO-ACTIVE port-pair(s) as **Auto Detected**. If you plan to reconfigure the destination MAC address in the heartbeat packets sent by the Active Fail-Open (AFO) kit, you can use the command [set afo port-pair and dst-mac](/network-and-platform/docs/set-afo-port-pair-and-dst-mac).
**Syntax:**
clear afo <port-pair | all> dst-mac
| Parameter | Description |
| --- | --- |
| | Set the port-pair for which the status is to be displayed. Valid port-pairs for NS-series Sensors are: g0/1-g0/2 \| g1/1-g1/2 \| g1/3-g1/4 \| g1/5-g1/6 \| g1/7-g1/8 \| g2/1-g2/2 \| g2/3-g2/4 \| g2/5-g2/6 \| g2/7-g2/8 \| g3/1-g3/2 \| g3/3-g3/4 \| g3/5-g3/6 \| g3/7-g3/8 |
| | Display the status of all the IFO-ACTIVE port-pairs. |
**Example 1:**
intruShell@NS7500> clear afo g0/1-g0/2 dst-mac
The above command clears the destination MAC address configuration on port-pair g0/1-g0/2.
**Example 2:**
intruShell@NS7500> clear afo all dst-mac
The above command clears the destination MAC address configuration on all the IFO-ACTIVE port-pairs.
**Applicable to:**
NS-series Sensors NS9500 and NS7500