--- title: "Clearing client data" slug: "clearing-client-data-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:23:30Z published: 2026-11-17T09:23:30Z canonical: "docs.trellix.com/clearing-client-data-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Clearing client data The NDR CLI `raid-wipe` menu allows you to securely erase the NDR appliance RAID device used for PX traffic metadata. You can remove the data from each file system you want to clear. The table below provides a description for each file system and the type of data removed. Completely wipe (erase) the NDR RAID device used for PX traffic metadata. | Partition Type | Description | Data Removed | | --- | --- | --- | | NPSTORE | This file system stores all PCAP data and artifacts from bulk PCAP downloads. | Download PCAP, stored PCAP, and bulk download artifacts | | Elastic | This file system stores all Elasticsearch data. | All Elasticsearch data. | | CMA | This file system stores all unprocessed metadata. | Unprocessed metadata | ### Prerequisites - Admin access ### Cleaning your RAID device To configure a RAID device clean operation: 1. Log in to the NDR as npadmin using the NDR IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` or `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@ia> enable` 3. Enter the npadmin password. The password can be 5 to 24 characters long. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@ia# configure system` 5. Enter the raid-wipe menu: npadmin@hostname(config)# raid-wipe You will see the following: Wipe Securely removed collected data 1. File partitions to shred/wipe: No partition selected. 2. Verbose Mode: False 3. Shred iteration: 4. Zero Drives: A. Apply the shred of filesystem. C. Cancel the shred. Enter the option from above to execute: 6. Enter 1 to select the partition you want to clean: `You will see the following` `Wipe` `Securely removed collected data` `NPSTORE:` `2. ELASTIC:` `3. CMA:` Press `Enter` to go back to the main menu. `Enter the number for the file system you want to include in the SHRED:` 7. Select the number (1,2 or 3) for the file system you want to shred. You can include a single file system or multiple file systems in the shred. 8. Select option 2 to enable Verbose mode: 9. Select option 3 to enter the number of shred iterations. You can select up to 9 iterations. The default is 1. `Enter the number of iterations for shred [1-9]:` 10. Select option 4 to enable zero drives. This will zero out each and every sector and byte in the drive after shredding. 11. Select option A to include the file system in the shred. > [!NOTE] > Note > > A file system shred results in a permanent loss of all data in each file system included in the RAID device wipe. You cannot retrieve the file system data after it is deleted. 12. You will see the following warning: ![cleaningRAIDCLI.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-499acc36-1445-fdf5-8944-7f371c3f5db9(4).png?sv=2026-02-06&spr=https&st=2026-11-19T12%3A14%3A32Z&se=2026-11-19T13%3A14%3A32Z&sr=c&sp=r&sig=cpDnghJWxyItytYl4k5wKduVvkCcRaKHEjhtgXWT39w%3D) 13. Type `DELETE` to confirm file system shred. 14. Press `Enter` to go back to the raid-wipe menu.