--- title: "cli default paging enable" slug: "cli-default-paging-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:12Z published: 2026-08-04T17:22:12Z canonical: "docs.trellix.com/cli-default-paging-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cli default paging enable Use this command to enable or disable paging of CLI output. If paging is enabled, all command and help text output will be displayed one screen at a time. If the text to be displayed fits on one screen, it will be printed normally and the pager will not be used. By default, CLI output paging is enable. > [!NOTE] > Note > > CLI Output paging only applies to output sent to a terminal. When driving the CLI using non-terminal methods (such as using a script), paging is disabled automatically and cannot be re-enabled during the session. ### Syntax `[no] cli default paging enable` ### Parameters ``` no ``` Disables the CLI output paging. ### Example The following example enables the CLI output paging feature. `hostname # cli default paging enable` The following example disables the CLI output paging feature. `hostname # no cli default paging enable` ### User role Admin ### Command mode Config ### Supported appliances - **Malware Analysis:** Before release 6.4 - **Central Management System:** Before release 6.4 - **Email Security — Server:** Before release 6.4 - **File Protect:** Before release 6.4 - **Endpoint Security (HX):** Release 2.5 - **Network Security:** Before release 6.4 - **Intelligent Virtual Execution - Server:** 7.9