--- title: "cli session paging enable" slug: "cli-session-paging-enable" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:12Z published: 2026-08-04T17:22:12Z canonical: "docs.trellix.com/cli-session-paging-enable" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cli session paging enable Enables a pause between each page of multi-page output (enabled by default). Press any key to display the next page. This setting applies only to the current session. ### Syntax `[no] cli session paging enable` ### Parameters `no` Use the `no` form of this command to disable paging for the current session. ### Example The following example disables paging for the current session: `hostname > no cli session enable paging` ### User role Admin or operator ### Command mode Disable, enable and config Modes ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 6.4 - **Central Management System:** Before Release 6.4 - **Email Security — Server:** Before Release 6.4 - **File Protect:** Before Release 6.4 - **Endpoint Security (HX):**: Release 2.5 - **Network Security:** Before Release 6.4