--- title: "cmc appliance <appliance ID> connection auto" slug: "cmc-appliance-appliance-id-connection-auto" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:17Z published: 2026-08-04T17:22:17Z canonical: "docs.trellix.com/cmc-appliance-appliance-id-connection-auto" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cmc appliance <appliance ID> connection auto Enables automatic connections between the Central Management System appliance and a managed appliance. > [!WARNING] > Important > > Automatic connections must be enabled on the requesting appliance in a client-initiated connection. To prevent future connection issues, do not enable automatic connections from the Central Management System appliance on behalf of a managed appliance that was added using a client-initiated connection. The value of the `Auto-connect` field in the output of the `show cmc client` command on the managed appliance is `yes`. The value of the `Auto-connect` field in the output of the `show cmc appliance <appliance ID>` command on the Central Management System appliance is `no`. ### Syntax [no] `cmc appliance <appliance ID> connection auto` ### Parameters `no` The no form of this command disables automatic connections between the Central Management System appliance and a managed appliance. `appliance ID` The unique appliance ID of the appliance. ### Example The following example enables automatic connections on the appliance EX3400-3. `hostname (config) # cmc appliance EX3400-3 connection auto` The following example disables automatic connections on the appliance EX3400-3. `hostname (config) #no cmc appliance EX3400-3 connection auto` ### User role Admin ### Command mode Config ### Supported appliances - **Central Management System:**: Release 7.1