--- title: "cmc appliance <applianceID> address <address>" slug: "cmc-appliance-applianceid-address-address" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:17Z published: 2026-08-04T17:22:17Z canonical: "docs.trellix.com/cmc-appliance-applianceid-address-address" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cmc appliance <applianceID> address <address> Sets the hostname or IP address that the Central Management System appliance will use to communicate with the client. > [!NOTE] > Note > > If auto-connect is enabled, the Central Management System appliance will automatically connect to that device. However, if a temporary auto-connect is enabled using `maintain` command, the temporary auto-connect is overridden and the system returns to its normal state. ### Syntax `[no] cmc appliance <applianceID> address <address>` ### Parameters `no` The `no` form of this command removes the hostname or IP address. `applianceID` The unique appliance ID of the appliance. `address` A hostname or IPv4 or IPv6 address used for client communication. ### Example The following example configures an ID address for the nx-32 appliance: `hostname (config) # cmc appliance nx-32 address 192.168.254.2` ### User role Admin ### Command mode Config ### Supported appliances - **Central Management System:** Release 7.1