--- title: "cmc appliance <applianceID> source address <IPaddress>" slug: "cmc-appliance-applianceid-source-address-ipaddress" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:17Z published: 2026-08-04T17:22:17Z canonical: "docs.trellix.com/cmc-appliance-applianceid-source-address-ipaddress" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cmc appliance <applianceID> source address <IPaddress> Sets or removes the IPv4 address the appliance will use to initiate client-initiated connections. This command is used to ensure that client-initiated connections are started from the expected IP address. If the IP address is set, the Central Management System appliance will not accept client-initiated connections from this appliance from IP addresses other than the once specified. > [!NOTE] > Note > > Currently IPv6 addresses are not supported by this command. IPv6 addresses are supported in the `appliance address` command. ### Syntax `[no] cmc appliance <applianceID> source address <IPaddress>` ### Parameters `no` Removes the previously added IP address. `applianceID` The unique appliance ID of the appliance to add. `IPaddress` The IP address the appliance will use to initiate client-initiated connections to the Central Management System appliance. ### Example The following example sets the source IP address 192.168.2.3 for the appliance EX2400-3. `hostname (config) # cmc appliance EX2400-3 source address 192.168.2.3` The following example removes the source IP address from the appliance EX2400-3. `hostname (config) # no cmc appliance EX2400-3 source address` ### User role Admin ### Command mode Config ### Supported appliances - **Central Management System:** Release 7.1