--- title: "cmc appliance <applianceID> source port <port>" slug: "cmc-appliance-applianceid-source-port-port" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:17Z published: 2026-08-04T17:22:17Z canonical: "docs.trellix.com/cmc-appliance-applianceid-source-port-port" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cmc appliance <applianceID> source port <port> Sets or removes the port the appliance will use to initiate client-initiated connections. > [!NOTE] > Note > > This command is used to ensure that client-initiated connections are started from the expected port. If the port is set, the CMS will not accept client-initiated connections from this appliance from ports other than the once specified. ### Syntax `[no] cmc appliance <applianceID> source port <port>` ### Parameters `no` Removes the previously added port. If no port is set, the system will not validate the connection based on the port used to initiate a connection. `<applianceID>` The unique appliance ID of the appliance to add. `<port>` The port the appliance will use to initiate client-initiated connections to the CMS appliance. ### Example The following example sets the source port to 32 for the appliance EX2400-3. `hostname (config) # cmc appliance EX2400-3 source port 32` The following example removes the port from the appliance EX2400-3. `hostname (config) # no cmc appliance EX2400-3 source port` ### User role Admin ### Command mode Config ### Supported appliances - **Central Management System:** Release 7.1