--- title: "cmc client bw-limit limit <KBPS>" slug: "cmc-client-bw-limit-limit-kbps" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:17Z published: 2026-08-04T17:22:17Z canonical: "docs.trellix.com/cmc-client-bw-limit-limit-kbps" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cmc client bw-limit limit <KBPS> Sets a limit on the bandwidth (in kilobytes per second) the appliance will use to transmit to the Central Management System appliance, if one is connected. By default, there is no limit. ### Syntax `[no] cmc client bw-limit limit <KBPS>` ### Parameters `no` Use the `no` form of the command to remove the configured bandwidth limit. `kps` Bandwidth in kilobytes per second. ### Example The following example specifies a maximum bandwidth limit of 1020 KBPSfor a FireEye appliance transmitting to theTrellix Central Management System appliance. ``` hostname (config) # cmc client bw-limit limit 1020 ``` ### User role Operator or admin ### Command mode Config ### Supported Appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 7.8 - **Email Security — Server:** Before Release 7.8 - **File Protect:** Before Release 7.8 - **Endpoint Security (HX):** Before Release 4.0 - **Network Security:** Before Release 7.8 - **Intelligent Virtual Execution - Server:** Before Release 7.8