--- title: "cmc client confirm-config" slug: "cmc-client-confirm-config" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:17Z published: 2026-08-04T17:22:17Z canonical: "docs.trellix.com/cmc-client-confirm-config" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cmc client confirm-config Requires confirmation before entering configuration mode on an appliance that is managed by a Central Management System appliance. When this setting is enabled, you cannot enter configuration mode until you confirm that you understand that configuration changes you make could override the Central Management System settings for the appliance. ### Syntax `[no] cmc client confirm-config` ### Parameters `no` Use the `no` form of the command to disable the confirmation requirement. ### Example The following example requires you to enter confirmation before entering configuration mode: ``` hostname (config) # cmc client confirm-config ``` ### User role Operator or admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 7.8 - **Email Security — Server:** Before Release 7.8 - **File Protect:** Before Release 7.8 - **Endpoint Security (HX):** Before Release 4.0 - **Network Security:** Before Release 7.8 - **Intelligent Virtual Execution - Server:** Before Release 7.8