--- title: "cmc client server auth authtype <authtype>" slug: "cmc-client-server-auth-authtype-authtype" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:22:17Z published: 2026-08-04T17:22:17Z canonical: "docs.trellix.com/cmc-client-server-auth-authtype-authtype" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # cmc client server auth authtype <authtype> Specifies whether a password or an "SSH" or "DSA2" identity should be used to connect to the Central Management System appliance. ### Syntax `[no] cmc client server auth authtype <authtype>` ### Parameters `no` Use the `no` form of this command to reset the authentication method to the default (`password`). `authtype` The authentication type - `password`—Use password authentication. - `ssh-dsa2`—Use SSH DSA2 authentication. - `ssh-rsa2`—Use SSH RSA2 authentication. ### Example The following example sets the authentication method to SSH DSA2: `hostname (config) # cmc client server auth authtype ssh-dsa2` ### User role Operator or admin ### Command mode Config ### Supported appliances This command is supported on the following appliances running the specified releases or later: - **Malware Analysis:** Before Release 7.8 - **Email Security — Server:** Before Release 7.8 - **File Protect:** Before Release 7.8 - **Endpoint Security (HX):** Before Release 4.0 - **Network Security:** Before Release 7.8 - **Intelligent Virtual Execution - Server:** Before Release 7.8