--- title: "Command-line Interface user" slug: "command-line-interface-user" updated: 2026-09-08T19:57:04Z published: 2026-09-08T19:57:04Z canonical: "docs.trellix.com/command-line-interface-user" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Command-line Interface user To use the Command-line Interface (CLI), you need to log on to CLI using the user cliadmin credentials. - A Command-Line Interface administrator uses **`cliadmin`** as the user name and **`atdadmin`** as the default password. - The read-only CLI user uses **`readonlycli`** as the user name and **`atdadmin`** as the default password. This CLI user will only have access to read-only commands. Readonlycli has no access to change or set any configuration; it can only retrieve information that is stored in system files. Ensure that you change the password for the readonlycli user from the command-line interface of cliadmin using the **` passwd readonlycli`** command. :