--- title: "Components of an NS3500 Sensor" slug: "components-of-an-ns3500-sensor" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:41Z published: 2026-09-17T09:43:41Z canonical: "docs.trellix.com/components-of-an-ns3500-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Components of an NS3500 Sensor The NS3500 front and rear panel details are described below. ### The NS3500 Sensor model **Sensor front panel**![Sensor front panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d6c85a0a-1d58-cf0c-718d-e5da4d51a6d1.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A46Z&se=2026-11-20T11%3A04%3A46Z&sr=c&sp=r&sig=URCHtzkP0GHJbrHQ51cF4pRhtkY12PmBLP6utsJj%2FdE%3D) 1. Power LED 2. Status LED 3. Compact Flash Memory LED 4. Speed LED for each ethernet port 5. Link LED for each ethernet port **Sensor rear panel**![Sensor rear panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e64f403a-1eb1-f45d-c286-a34dc23469b4.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A46Z&se=2026-11-20T11%3A04%3A46Z&sr=c&sp=r&sig=URCHtzkP0GHJbrHQ51cF4pRhtkY12PmBLP6utsJj%2FdE%3D) 1. Power supply (12V DC IN) 2. Power switch 3. RJ-45 Console port (1) 4. USB ports (2) 5. RJ-45 10/100/1000 Management port (MGMT) (1) 6. RJ-45 10/100/1000 Response port (R1) (1 - currently not supported) 7. RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (4) The following table gives the details of the supported ports. | Ports | NS3500 | | --- | --- | | Fixed RJ-45 ports (internal fail-open) | 4 (10/100/1000 Mbps) | | Console port | 1 | | Dedicated Management ports (RJ-45) | 1 (10/100/1000 Mbps) | | USB port | 2 | - **Console port** — Use to set up and configure the Sensor using the CLI. - **RJ-45 10/100/1000 Mbps ethernet monitoring ports** — Enables you to monitor four SPAN ports, two segments in-line, or a combination - **External USB port** — Use these in troubleshooting situations for system recovery purposes. You need to restart the Sensor through the USB storage device. - **RJ-45 10/100/1000 Management port** — Use for communication with the Manager server. You can assign an IP address to this port during installation. - **Power Supply** — Power supply is included with an NS3500 Sensor. The supply uses a 12V DC IN. Trellix provides 12V DC adapter with power cord. International customers must procure a country-appropriate power cable. The NS-series Sensor does not have internal taps; you must use it with a third-party external tap to run it in tap mode.