--- title: "Components of an NS5x00 Sensor" slug: "components-of-an-ns5x00-sensor" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:45Z published: 2026-09-17T09:43:45Z canonical: "docs.trellix.com/components-of-an-ns5x00-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Components of an NS5x00 Sensor The NS5x00 front and rear panel details are described below. ### The NS5100/NS5200 Sensor model **Sensor front panel**![Sensor front panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8af1baba-7495-fda0-ecd0-2bb79945e630.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A44%3A49Z&se=2026-11-20T11%3A44%3A49Z&sr=c&sp=r&sig=76Gw80v9OSpP3M2%2Fax2c%2BD4ncAPh8gA2jOOLCiq1DIQ%3D) 1. Console port (1) 2. RJ-11 port (1) for fail-open control of two built-in SFP+ ports in slot G0. The RJ-11 ports support 1 Gbps (SFP) fiber and 10 Gbps (SFP+) (SR and LR). You can convert these ports to copper ports by using the copper SFP transceivers. 3. SFP/SFP+ 1/10 fiber Gigabit or SFP 1 Gbps copper Ethernet ports (2) 4. RJ-11 port (6) for external passive fail-open control of twelve SFP ports in slot G1. The RJ-11 ports support 1 Gbps (SFP) fiber (SR and LR). You can convert these ports to copper ports by using the copper SFP transceivers. The fail-open ports are internally wired to control the SFP ports. For example, port X1 controls monitoring ports G1/1 and G1/2; port X2 controls monitoring ports G1/3 and G1/4 and so on. 5. SFP 1 Gbps copper or fiber Gigabit Ethernet ports (12) 6. RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (8) The supported transceiver modules are SFP+ (MM and SM), SFP Fiber (MM and SM) and Copper SFP. **Sensor rear panel**![Sensor rear panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-12756366-3369-0ed3-c809-d7b54978cb8c.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A44%3A49Z&se=2026-11-20T11%3A44%3A49Z&sr=c&sp=r&sig=76Gw80v9OSpP3M2%2Fax2c%2BD4ncAPh8gA2jOOLCiq1DIQ%3D) 1. Power supply inlet (2) 2. USB ports (2) 3. RJ-45 10/100/1000 Management port (MGMT) (1) 4. RJ-45 10/100/1000 Response port (R1) (1) The NS5x00 Sensors have four fan units on the top. **Fan units-NS5100/NS5200**![Fan units-NS5100/NS5200](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-95a89cf1-83f6-60be-b1bb-917757cc4799.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A44%3A49Z&se=2026-11-20T11%3A44%3A49Z&sr=c&sp=r&sig=76Gw80v9OSpP3M2%2Fax2c%2BD4ncAPh8gA2jOOLCiq1DIQ%3D) The direction of airflow in all the Sensors is front to back. Cold air enters through the front of the chassis. > [!NOTE] > Note > > The fan units and power supplies are field replaceable. The following table gives the details of the supported ports. | Ports | NS5100/NS5200 | | --- | --- | | Fixed RJ-45 ports (internal fail-open) | 8 | | Fixed SFP 1 Gbps ports | 12 | | Fixed 10 GigE/1 GigE (SFP+/SFP) ports | 2 | | Fixed RJ-11 ports (external passive fail-open) | 6 | | Dedicated Response ports (RJ-45) | 1 (1G/100M/10M) | | Dedicated Management ports (RJ-45) | 1 (1G/100M/10M) | | Dedicated Auxiliary port (DB9) | 1 | | USB ports | 2 | - **Console port** — Use to set up and configure the Sensor using the CLI. - **RJ-11 port** — Controls the SFP/SFP+ 1/10 Gigabit Ethernet port pair in passive fail-open mode - **SFP/SFP+ 1/10 gigabit ethernet ports** — Enables you to monitor two SPAN ports or one in-line segment - **RJ-45 10/100/1000 Mbps ethernet monitoring ports** — Enables you to monitor eight SPAN ports, four segments in-line, or a combination - **External USB ports** — Use these in troubleshooting situations for system recovery purposes. You need to restart the Sensor through the USB storage device. - **RJ-45 10/100/1000 Management port** — Use for communication with the Manager server. You can assign an IP address to this port during installation. - **RJ-45 10/100/1000 Response port** — When you operate this port in SPAN or tap mode, it enables you to inject response packets back through a switch or a router. - **Power Supply** — Power supply is included with an NS5x00 Sensor. The supply uses a standard IEC port (IEC320-C13). Trellix provides a standard, 2 m NEMA 5-15P (US) power cable (3 wire). International customers must procure a country-appropriate power cable. The NS-series Sensor does not have internal taps; you must use it with a third-party external tap to run it in tapped mode.