--- title: "Components of an NS7x00 Sensor" slug: "components-of-an-ns7x00-sensor" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:41Z published: 2026-09-17T09:43:41Z canonical: "docs.trellix.com/components-of-an-ns7x00-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Components of an NS7x00 Sensor The NS7x00 front and rear panel details are described below. ### The NS7100/NS7200/NS7300 Sensor model **Sensor front panel**![Sensor front panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-c81979b5-afc8-a92a-7cb7-d71ed878ba8a.png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A44%3A58Z&se=2026-11-20T13%3A44%3A58Z&sr=c&sp=r&sig=ns8hsQB4RzZk7vNBj2TTsNfSVcui2AthkuXxMtea%2FkQ%3D) 1. Console port (1) 2. RJ-11 port (1) for fail-open control of two built-in SFP+ ports in slot G0. The RJ-11 port supports 1 Gbps (SFP) copper or fiber and 10 Gbps (SFP+) (SR and LR) 3. SFP+ 1/10 Gigabit Ethernet ports (2) > [!WARNING] > Important > > The RJ-11 port controls only this SFP+ 1/10 port pair in passive fail-open mode. 4. Two slots for I/O modules (Any combination of the interface modules can be used) > [!NOTE] > Note > > The supported interface modules need to be purchased separately. - SFP/SFP+ 1/10 Gigabit Ethernet Monitoring ports (8) - RJ-45 10/100/1000 Mbps with internal fail-open Ethernet Monitoring ports (6) - 10/1 GigE SM 8.5 micron with internal fail-open Monitoring ports (4) - 10/1 GigE MM 50 micron with internal fail-open Monitoring ports (4) - 10/1 GigE MM 62.5 micron with internal fail-open Monitoring ports (4) 5. RJ-45 10/100/1000 Mbps Ethernet Monitoring ports (8) The supported transceiver modules are SFP+ (MM and SM), SFP Fiber (MM and SM) and SFP Copper. **Sensor rear panel**![Sensor rear panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-db4d50f9-518b-6eb3-0d90-54f16d32327e.png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A44%3A58Z&se=2026-11-20T13%3A44%3A58Z&sr=c&sp=r&sig=ns8hsQB4RzZk7vNBj2TTsNfSVcui2AthkuXxMtea%2FkQ%3D) 1. Auxiliary port (1) 2. USB ports (2) 3. Power supply inlet (2) 4. RJ-45 10/100/1000 Response port (R1) (1) 5. RJ-45 10/100/1000 Management port (Mgmt) (1) The NS7x00 Sensors have five fan units on the top. **Fan units-NS7100/NS7200/NS7300**![Fan units-NS7100/NS7200/NS7300](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a4f6fef4-a95a-edbd-f2a5-3c7159568ccd.png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A44%3A58Z&se=2026-11-20T13%3A44%3A58Z&sr=c&sp=r&sig=ns8hsQB4RzZk7vNBj2TTsNfSVcui2AthkuXxMtea%2FkQ%3D) The direction of airflow in all the Sensors is front to back. Cold air enters through the front of the chassis. > [!NOTE] > Note > > The fan units and power supplies are field replaceable. The following table gives the details of the supported ports. | Ports | NS7100/NS7200/NS7300 | | --- | --- | | Fixed Gigabit Ethernet—Copper ports (internal fail-open) | 8 | | Fixed 10 GigE/1 GigE (SFP+) ports | 2 | | Network I/O slots | 2 | | Network I/O modules | 4-port 10/1 GigE SM 8.5 micron with internal fail-open 4-port 10/1 GigE MM 50 micron with internal fail-open 4-port 10/1 GigE MM 62.5 micron with internal fail-open 6-port RJ-45 1 GigE with internal fail-open 8-port (SFP+/SFP) 10/1 GigE | | 10 Gigabit Ethernet | Modular up to 18 | | Dedicated Response ports (RJ-45) | 1 (1G/100M/10M) | | Dedicated Management ports (RJ-45) | 1 (1G/100M/10M) | | Dedicated Auxiliary port (DB9) | 1 | | USB ports | 2 | - **Console port** — Use to set up and configure the Sensor using the CLI. - **RJ-11 port** — Controls the SFP+ 1/10 Gigabit Ethernet port pair in passive fail-open mode - **SFP/SFP+ 1/10 Gigabit Ethernet ports** — Enables to monitor two SPAN ports, two segments in-line, or a combination - **RJ-45 10/100/1000 Mbps Ethernet Monitoring ports** — Enables to monitor eight SPAN ports, four segments in-line, or a combination - **DB9 Auxiliary port** — Use to dial in remotely to set up and configure the Sensor. - **External USB ports** — Use these in troubleshooting situations for system recovery purposes. You need to restart the Sensor through the USB storage device. - **RJ-45 10/100/1000 Management port**— Use for communication with the Manager server. You can assign an IP address to this port during installation. - **RJ-45 10/100/1000 Response port** — When you're operating in SPAN or tap mode, enables you to inject response packets back through a switch or router. - **Power Supply** — Power supply is included with an NS7x00 Sensor. The supply uses a standard IEC port (IEC320-C13). Trellix provides a standard, 2m NEMA 5-15P (US) power cable (3 wire). International customers must procure a country-appropriate power cable. The NS-series Sensor does not have internal taps; you must use it with a third-party external tap to run it in tapped mode.