--- title: "Components of an NS9600 Sensor" slug: "components-of-an-ns9600-sensor" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/components-of-an-ns9600-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Components of an NS9600 Sensor Correlate the pictures with the information following it to understand the components of an NS9600 Sensor. **Sensor front panel**![Sensor front panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7500b711-c61e-524a-1912-adb10cb864ca.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A44%3A18Z&se=2026-11-20T09%3A44%3A18Z&sr=c&sp=r&sig=5DC2%2FB90QWZEfWJtARgqEDrbfW10kbNfRMzk%2BK9kWjY%3D) 1. 4 QSFP28 /QSFP+ 100/40 Gigabit Ethernet ports in built-in G0 module. These ports support the following BiDi, SR and LR transceivers: - 40 Gbps (QSFP+) fiber - 100 Gbps (QSFP28) fiber 2. Three slots for following interface modules - - In G1 and G2 (any combination of the interface modules can be used): - 4-port 100/40 Gigabit SR MTP/MPO interface module - 4-port 100/40 Gigabit SR MTP/MPO interface module with built-in fail open - 4-port 40 Gigabit LR4 interface module with built-in fail open - 4-port 100 Gigabit LR4 interface module with built-in fail open - 4-port 100/40 Gigabit BiDi interface module with built-in fail open - in G1, G2, and G3 (Any combination of the interface modules can be used): - 6-port RJ45 10/1 Gigabit Ethernet interface module with built-in fail open - 8-port 10/1 Gigabit fiber (SM and MM) interface module with built-in fail open > [!WARNING] > Important > > 4-port 100/40 Gigabit with internal fail open interface modules (that is, 100/40 Gigabit SR MTP/MPO, 40 Gigabit LR4, 100 Gigabit LR4, and 100/40 Gigabit BiDi) are supported in NS9600 Sensors running on 11.1 Update 8 version or later. > [!NOTE] > Note > > The supported interface modules need to be purchased separately. > [!WARNING] > Caution > > Apart from the network interface modules mentioned above, no other interface modules are compatible with NS9600 Sensor. Transceiver modules are supported in built-in G0 module only. The supported transceiver modules are QSFP28 (MM, SM, and DAC) and QSFP+ (MM and SM). **Sensor rear panel**![Sensor rear panel](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-b1fd4ab9-6c09-0c29-f0f3-8e57b623e18e.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A44%3A18Z&se=2026-11-20T09%3A44%3A18Z&sr=c&sp=r&sig=5DC2%2FB90QWZEfWJtARgqEDrbfW10kbNfRMzk%2BK9kWjY%3D) 1. Power supply A/B (Pwr A/Pwr B) 2. USB ports (2) 3. Console port 4. RJ-45 1000/10000 Management port (Mgmt) 5. RJ-45 1000/10000 Response port (R1)