--- title: "Components of Connection Limiting rules" slug: "components-of-connection-limiting-rules-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:57Z published: 2026-11-19T12:27:57Z canonical: "docs.trellix.com/components-of-connection-limiting-rules-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Components of Connection Limiting rules You define Connection Limiting rules in a Connection Limiting policy. To effectively use Connection Limiting policies, familiarize yourself with the components that make up a Connection Limiting rule. **Connection Limiting rules options**![Connection Limiting rules options](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-115dd307-cad9-6c4c-fa60-0b122e158eab(7).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A38Z&se=2026-11-20T12%3A16%3A38Z&sr=c&sp=r&sig=w9EkPpiOEl9Wsbse%2FnTVs6ZQnnc9l8NEeNEzzzHIk3s%3D) **Connection Limiting rules option definitions** | Option | Definition | | --- | --- | | **#** | Displays the serial number of the rule. This is referenced in the alerts. | | **State** | Displays whether a rule is enabled or disabled. Sensor does not apply disabled rules. This option might help you during troubleshooting. | | **Description** | Optionally enter additional information about the rule. You can enter a description up to 64 characters long and click **OK**. | | **Direction** | - **Inbound** — To apply this rule only to traffic seen at the outside port. - **Outbound** — To apply this rule only to traffic seen at the inside port. - **Any** — To apply this rule at both the ports. | | **Rule Type** | - **Protocol** — To limit TCP/UDP/ICMP active connections or connection rate from a host. - **GTI** — To limit connection rate based on reputation and/or geo-location of external hosts. > [!NOTE] > Note > > Trellix GTI-based rules are only applicable when Trellix GTI IP Reputation is enabled. > [!NOTE] > Note > > Both the rule types are specified on a per-direction (inbound/outbound) basis. | | **Threshold** | **Type** : - **Connection Rate** — The rate of the connection defined per second. - **Active Connections** — The number of active connections. > [!NOTE] > Note > > Only **Connection Rate** is available for Trellix GTI rules. | | **Value**: Define the connections per second or the number of active connections based on the threshold type you selected. | | **External** | **Reputation** : Select one of the external Trellix GTI reputations (risk levels): - **High Risk** - **Medium Risk or High Risk** - **Unverified, Medium or High Risk** - **Any** > [!NOTE] > Note > > This option is applicable only for Trellix GTI rule type. | | **Location** : Select the external geo-location (Trellix GTI countries). > [!NOTE] > Note > > This option is applicable only for Trellix GTI rule type. | | **Service** | Select one of the following transport protocols from the **Transport Protocol** drop-down list: - **TCP** (You can specify the port number for TCP protocol.) - **UDP** (You can specify the port number for UDP protocol.) - **Ping (ICMP echo Request)** - **All TCP & UDP** **Service option**![Service option](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-132765b2-3267-f22a-6938-c77069aa6f7b(7).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A16%3A38Z&se=2026-11-20T12%3A16%3A38Z&sr=c&sp=r&sig=w9EkPpiOEl9Wsbse%2FnTVs6ZQnnc9l8NEeNEzzzHIk3s%3D) > [!NOTE] > Note > > Service component is only applicable for protocol rule type. | | **Response** | Select the response action that the Sensor must perform when the traffic matches the options you specified in the Connection Limiting rule. The following are the response options: - **Alert Only** - **Alert & Drop Excess Connection** - **Alert & Deny Excess Connection** - **Alert & Quarantine** | | **Prompt for assignment after save** | When selected, the **Assignments** window opens when you save a policy and you can assign the policy to the required Sensor resources. When deselected, the rule is saved in the Manager database and the policy appears in the **Connection Limiting** list. | | **Save** | Saves the Connection Limiting rules in the Manager database. The Connection Limiting policy is listed in the **Connection Limiting** list. |