--- title: "configuration jump-start" slug: "configuration-jump-start-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:35Z published: 2026-11-19T12:28:35Z canonical: "docs.trellix.com/configuration-jump-start-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # configuration jump-start This CLI allows you to update network parameters. **Syntax:** `configuration jump-start` The following table lists the parameters: | Parameters | Description | | --- | --- | | `Hostname` | Enter the hostname to be assigned to the Manager server. | | `Admin password` | Enter the password to be assigned to the Manager server. Next, confirm the password assigned to the Manager server. | | `Enable remote access for admin user` | Enter Yes or No. | | `Use DHCP on ether1 interface` | Enter Yes or No. | | `Use zeroconf on ether1 interface` | Enter Yes or No. | | `Primary IPv4 address and masklen` | Enter the primary IPv4 address and mask length. | | `Default gateway` | Enter the default gateway IP address | | `Primary DNS server` | Enter the primary DNS server IP address. | | `Domain name` | Enter the domain name. | | `Enable fenet service` | Enter Yes to enable the fenet service and No to disable the service. | | `Enable fenet license update service` | Enter Yes to enable the fenet license service and No to disable the service. | | `Sync appliance time with fenet` | Enter Yes or No. | | `Enable NTP` | Enter Yes to enable the NTP and No to disable the NTP. | | `Update licenses from fenet` | Enter Yes to update the fenet license service and No to disable the service. | | `Enable IPv6 on management interface` | Enter Yes to enable IPv6 address and No to disable the IPv6 address on the management interface. | | `Send a request to be managed by CMS` | Enter Yes or No. | **Sample Output:** ``` IPSManager (config) # configuration jump-start Trellix configuration wizard Step 1: Hostname? [tros-172-141] TrellixOS Step 2: Admin password (Enter to leave unchanged)? admin Step 3: Enable remote access for 'admin' user? [yes] yes Step 4: Use DHCP on ether1 interface (connection will be lost upon change) ? [no] no Step 5: Use zeroconf on ether1 interface (connection will be lost upon change) ? [no] no Step 6: Primary IPv4 address and masklen (connection will be lost upon change) ? 10.10.12.252/24 Step 7: Default gateway (connection will be lost upon change) ? 10.10.13.252 Step 8: Primary DNS server? 10.11.22.224 Step 9: Domain name? [tros.com] tros.com Step 10: Enable fenet service? [yes] yes Step 11: Enable fenet license update service? [yes] yes Step 12: Sync appliance time with fenet? [yes] yes Step 13: Enable NTP? [yes] Step 14: Update licenses from fenet? [yes] yes Step 15: Enable IPv6 on management interface (ether1)? [no] no Step 16: Send a request to be managed by CMS (More common method is to set up management from CMS) [yes/no]? no To change an answer, enter the step number to return to. Otherwise hit to save changes and exit. Choice: Configuration changes saved. ```