This CLI allows you to update network parameters.
Syntax: configuration jump-start
The following table lists the parameters:
Parameters | Description |
|---|---|
| Enter the hostname to be assigned to the Manager server. |
| Enter the password to be assigned to the Manager server. Next, confirm the password assigned to the Manager server. |
| Enter Yes or No. |
| Enter Yes or No. |
| Enter Yes or No. |
| Enter the primary IPv4 address and mask length. |
| Enter the default gateway IP address |
| Enter the primary DNS server IP address. |
| Enter the domain name. |
| Enter Yes to enable the fenet service and No to disable the service. |
| Enter Yes to enable the fenet license service and No to disable the service. |
| Enter Yes or No. |
| Enter Yes to enable the NTP and No to disable the NTP. |
| Enter Yes to update the fenet license service and No to disable the service. |
| Enter Yes to enable IPv6 address and No to disable the IPv6 address on the management interface. |
| Enter Yes or No. |
Sample Output:
IPSManager (config) # configuration jump-start Trellix configuration wizard Step 1: Hostname? [tros-172-141] TrellixOS Step 2: Admin password (Enter to leave unchanged)? admin Step 3: Enable remote access for 'admin' user? [yes] yes Step 4: Use DHCP on ether1 interface (connection will be lost upon change) ? [no] no Step 5: Use zeroconf on ether1 interface (connection will be lost upon change) ? [no] no Step 6: Primary IPv4 address and masklen (connection will be lost upon change) ? 10.10.12.252/24 Step 7: Default gateway (connection will be lost upon change) ? 10.10.13.252 Step 8: Primary DNS server? 10.11.22.224 Step 9: Domain name? [tros.com] tros.com Step 10: Enable fenet service? [yes] yes Step 11: Enable fenet license update service? [yes] yes Step 12: Sync appliance time with fenet? [yes] yes Step 13: Enable NTP? [yes] Step 14: Update licenses from fenet? [yes] yes Step 15: Enable IPv6 on management interface (ether1)? [no] no Step 16: Send a request to be managed by CMS (More common method is to set up management from CMS) [yes/no]? no To change an answer, enter the step number to return to. Otherwise hit <enter> to save changes and exit. Choice: <enter> Configuration changes saved.