---
title: "Configuration of a Sensor"
slug: "configuration-of-a-sensor-2"
tags: ["Install and Get Started", "IPS 11.1.x"]
updated: 2026-11-19T12:54:23Z
published: 2026-11-19T12:54:23Z
canonical: "docs.trellix.com/configuration-of-a-sensor-2"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Configuration of a Sensor
This section describes how to configure a Sensor. This information is generic to all Sensor appliance models.
> [!NOTE]
> Note
>
> The information presented in this chapter was developed based on devices in a specific lab environment. All Sensors used in this document started with a cleared (default) configuration. If you are working in a live network, please ensure that you understand the potential impact of any command before using it. For more information on the available Sensor CLI commands, see the CLI commands section in the Trellix Intrusion Prevention System Product Guide.