--- title: "Configuration of gigabit ethernet inline fail open - passive status" slug: "configuration-of-gigabit-ethernet-inline-fail-open-passive-status-1" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:26:40Z published: 2026-11-19T12:26:40Z canonical: "docs.trellix.com/configuration-of-gigabit-ethernet-inline-fail-open-passive-status-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuration of gigabit ethernet inline fail open - passive status When deploying your Gigabit Ethernet ports in **Inline Fail Open - Passive mode**, you must verify RJ-11 to RJ-45 control cable connection is in place between X1(RJ-11)NS7500 and PFO(RJ-45) control ports. > [!NOTE] > Note > > Fail-open operation for GE ports requires use of the optional Bypass Switch provided in the Gigabit Fail-Open Bypass Kits (sold separately). > [!TIP] > Tip > > For more information on steps on how to properly connect your Sensor for GE Inline Fail-Open functionality, see Trellix Intrusion Prevention System Installation Guide. The port status and operating mode status for Manager fail-open passive for NS-series Sensors are as follows:: | Inline Fail Open - Passive port status | Operating Mode Status on PFO | | --- | --- | | Present | The inline fail open - passive kit is in inline fail-open mode. | | Bypassing | The inline fail open - passive kit is in bypass mode. The bypass switch has been activated. The sensor does not monitor traffic during this time. For example, when sensor ports are administratively disabled. | | Unknown | Unable to get the status of the inline fail-open passive kit. For example, when the control cable is unplugged. | | N/A | Not Applicable; the operating mode is not in inline fail open - passive mode. |