--- title: "Configuration of ports for M-series devices" slug: "configuration-of-ports-for-m-series-devices" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:28:15Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/configuration-of-ports-for-m-series-devices" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuration of ports for M-series devices To view or configure the settings of the monitoring ports for Trellix IPS M-series devices, go to **Devices** → **** → **Devices** → **** → **Setup** → **Physical Ports**. The M-series devices require configuration of XFP and SFP Monitoring ports with certain guidelines regarding the type and functionality of the module. > [!NOTE] > Note > > Trellix supports only those XFP/SFP modules that are purchased through Trellix or from a Trellix-approved vendor. > [!NOTE] > Note > > Do*not* use XC ports. These ports are reserved for interconnection between the Primary device (M-8000 P) and Secondary device (M-8000 S).