--- title: "Configuration of RADIUS server in the Manager" slug: "configuration-of-radius-server-in-the-manager-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/configuration-of-radius-server-in-the-manager-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configuration of RADIUS server in the Manager Remote Authentication Dial In User Service (RADIUS) is an AAA (authentication, authorization and accounting) protocol for applications such as network access. While connecting to the internet using a modem, you are required to enter a username and password. The information is passed through a Network Access Device (NAD) device, and then to a RADIUS server over the RADIUS protocol. The RADIUS server checks if the information is correct using authentication schemes like PAP, CHAP, and EAP-MD5. If accepted, the server will authorize the access. Using Manager, you can configure a RADIUS server at the Manager level. You can configure a maximum of 4 RADIUS servers onto Manager. If the first RADIUS server is not available for communication, due to a network failure, Manager will try to communicate with the second or the third server. If authentication fails at any available servers, then Manager will not communicate with the other available servers. The RADIUS action enables you to use RADIUS to authenticate existing users on their RADIUS server. Trellix IPS supports the PAP, CHAP, and EAP-MD5 schemes of RADIUS authentication. > [!NOTE] > Note > > When EAP-MD5 scheme is selected, the Manager internally authenticates requests that use MS-CHAPv2. **RADIUS Server Configuration**![RADIUS Server Configuration](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-7502da7c-0c29-4cd5-d63d-3d19d005dfb5(7).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A54%3A49Z&se=2026-11-20T12%3A54%3A49Z&sr=c&sp=r&sig=zya3HiSJgDdPXG10Zvwwm3GvPYon3iIhJEDUr%2BhAbAk%3D) You can configure the RADIUS authentication in the Manager from **Manager** → **** → **Setup** → **GUI Access** → **RADIUS Authentication**. > [!NOTE] > Note > > For the Central Manager, you can configure RADIUS authentication from **Manager** → **Setup** → **GUI Access** → **RADIUS Authentication**.