---
title: "Configuration of the Sensor setup"
slug: "configuration-of-the-sensor-setup"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:40:36Z
published: 2026-10-05T15:40:36Z
canonical: "docs.trellix.com/configuration-of-the-sensor-setup"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Configuration of the Sensor setup
You can configure the Sensor setup depending on the type of IP address.
- IPv4
- IPv6
- Both IPv4 and IPv6
**Configuring the Sensor setup for IPv4 address**:
You are prompted if you enter the IP Type as 1. Your default Sensor IPv4 address is displayed in the [ ] brackets. The following prompts are displayed.
Please enter the Sensor IP ( A.B.C.D ) [ Sensor_IPv4address ]:
Please enter the Sensor subnet mask ( A.B.C.D ) [Sensor_subnet_mask_IPaddress]:
Please enter the Manager primary IPv4 address ( A.B.C.D ) [ Manager_IPaddress ]:
**You can set the Manager secondary IP in case the Manager has two interfaces**
Press Y to configure Manager secondary IP address [ N ]:
If you type **Y**, the following prompt appears:
Please enter the Manager secondary IPv4 ( A.B.C.D ) [ Manager_IPaddress ]:
Please enter the Sensor default gateway ( A.B.C.D ) [ Sensor_gateway_IPv4 address ]:
Please enter management port configuration choice(a/m) [port_configuration_selected]:
- **a**: Signifies auto configured
- **m**: Signifies manually configured
Press Y to set shared secret key now or N to exit [Y]:
Please enter shared secret key:
**Configuring the Sensor setup for IPv6 address:**
You are prompted if you enter the IP Type as 2. Your default Sensor IPv6 address is displayed in the [ ] brackets. The following prompts are displayed.
Please enter the Sensor IPV6 address/ subnet prefix length mask ( A:B:.C:D:E:F:G:H/I ) [IPV6 address/subnet]:
Please enter the Manager primary IPV6 address ( A:B:C:D:E:F:G:H ) [ Manager_IPaddress ]:
**You can set the Manager secondary IP in case the Manager has two interfaces**
Please enter the Manager secondary IPv6 address ( A:B:C:D:E:F:G:H ) [ Manager_IPaddress ]:
Please enter the Sensor default IPv6 gateway ( A:B:C:D:E:F:G:H ) [ Sensor_gateway_IPv6 address ]:
Please enter management port configuration choice(a/m) [port_configuration_selected]:
- **a**: Signifies auto configured
- **m**: Signifies manually configured
Press Y to set shared secret key now or N to exit [Y]:
Please enter shared secret key:
**Configuring the Sensor setup for both IPv4 and IPv6 address:**
You are prompted if you enter the IP Type as 3. Your default Sensor IPv4 address is displayed in the [ ] brackets. The following prompts are displayed.
Please enter the Sensor IP ( A.B.C.D ) [ Sensor_IPv4address ]:
Please enter the Sensor subnet mask ( A.B.C.D ) [Sensor_subnet_mask_IPaddress]:
Please enter the Sensor IPV6 address/ subnet prefix length mask ( A:B:.C:D:E:F:G:H/I ) [IPV6 address/subnet]:
Please enter the Manager primary IPv4 address or IPV6 address ( A.B.C.D or A:B:C:D:E:F:G:H ) [ Manager_IPaddress ]:
**You can set the Manager secondary IP in case the Manager has two interfaces**
Please enter the Manager secondary IPv4 or IPv6 address ( A.B.C.D or A:B:C:D:E:F:G:H ) [ Manager_IPaddress ]:
Please enter the Sensor default gateway ( A.B.C.D ) [ Sensor_gateway_IPv4 address ]:
Please enter the Sensor default IPv6 gateway ( A:B:C:D:E:F:G:H ) [ Sensor_gateway_IPv6 address ]:
Please enter management port configuration choice(a/m) [port_configuration_selected]:
- **a**: Signifies auto configured
- **m**: Signifies manually configured
Press Y to set shared secret key now or N to exit [Y]:
Please enter shared secret key: