--- title: "Configure advanced device settings" slug: "configure-advanced-device-settings" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:08Z published: 2026-10-05T15:40:08Z canonical: "docs.trellix.com/configure-advanced-device-settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure advanced device settings Use the **Advanced Device Settings** page to configure settings for packet captures, tunneled traffic, and CLI activity. ## Task 1. At an Admin domain level, select **Devices** → **** → **Global** → **IPS Device Settings** → **Advanced Device Settings**. The **Advanced Device Settings** page appears. > [!NOTE] > Note > > Alternatively, you can configure these settings for a Sensor from **Devices** → **** → **Devices** → **** → **Setup** → **Advanced** → **Advanced Device Settings**. 2. The bytes to be captured when pre-attack capturing is enabled is set in the IPS Policy and is displayed on this page. Valid values are 128 and 256 bytes. 3. Select the Inspect Tunneled traffic checkbox to parse IPv4 and IPv6 traffic for all supported tunneling protocols like GRE, GTP for malware detection. By default, this checkbox is deselected. 4. Select a Snort Rule Engine. You can select either the **Trellix IPS Snort** engine or the **Suricata Snort** engine. By default, the **Snort Rule Engine** is set to **Trellix IPS Snort**. 5. From **CLI Activity Logging** options, select **Log to Device Only**, **Log to Manager Only**, or **Log to Device and Manager** to track executed CLI commands. By default, this is set to **Disabled**. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-E8614595-8789-4388-B2DB-FCB79D03F808-low(1).jpg?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A22Z&se=2026-11-20T11%3A04%3A22Z&sr=c&sp=r&sig=e3%2FzGIvv29U0WLBvV9EXwOJSJWM3jK5bJzoxEOpGo50%3D) 6. Select **Show CPU usage in the CLI** to determine the Sensor load. By default, this checkbox is deselected. 7. Select **Log SSH Access to the CLI** to log all attempts to access CLI on the device. By default, this checkbox is deselected. 8. Use the **Restrict SSH Access to CLI** checkbox to configure IP addresses or CIDR blocks to restrict SSH access. You can set IPv4 and IPv6 blocks and click **Add**. By default, this checkbox is deselected. > [!NOTE] > Note > > For Virtual IPS Sensors in the AWS environment, this checkbox must be selected and the IPv4/IPv6 CIDR blocks must be added to restrict SSH access from external invalid IPs. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-635ECBE1-7943-4227-AFE7-E591E821AE63-low.png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A04%3A22Z&se=2026-11-20T11%3A04%3A22Z&sr=c&sp=r&sig=e3%2FzGIvv29U0WLBvV9EXwOJSJWM3jK5bJzoxEOpGo50%3D) 9. Click **Save**.