--- title: "Configure an existing device for indirect mode signature set update" slug: "configure-an-existing-device-for-indirect-mode-signature-set-update" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:38:58Z published: 2026-09-23T09:38:58Z canonical: "docs.trellix.com/configure-an-existing-device-for-indirect-mode-signature-set-update" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure an existing device for indirect mode signature set update Follow this procedure to configure an existing device for offline signature set update: ## Task 1. Go to **Devices** → **** → **Global** → **Device Manager**. The **Device Manager** page is displayed. 2. Select the **Sensors** tab to view the list of devices configured. 3. Double click on the required Sensor. The **** details panel is displayed. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-B67D6772-1FC6-41E6-9F9B-02FBE0C14900-low.jpg?sv=2026-02-06&spr=https&st=2026-11-20T05%3A09%3A48Z&se=2026-11-20T06%3A09%3A48Z&sr=c&sp=r&sig=%2BV90Ra8wm%2B8tzq5u5UTvUDl0IWRauw60M7RwnlRq%2Boo%3D) 4. Scroll to the **Sync** section. Select **Indirect** against **Sync Mode** drop-down and click **Save**. > [!NOTE] > Note > > You can also change the configured mode in **Summary** page. For standalone Sensors, go to **Devices** → **** → **Devices** → **** → **Summary**. For Sensors in Stack, go to **Devices** → **** → **Devices** → **** → **Member Sensors** → **Stackname-node id** → **Summary**. In the **Summary** page, go to **Sync** monitor and select **Indirect** against **Sync Mode** drop-down and click **Save**. 5. An information box confirms a successful edit. The device is configured for **Indirect** updates.