--- title: "Configure attack details" slug: "configure-attack-details-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/configure-attack-details-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure attack details You can configure and update the attack settings either by inheriting the settings from the master IPS policy or set them explicitly in the attack details panel. The attack details panel has two tabs: **Settings** and **Description**. On the **Settings** tab, you can set the configurable fields for Sensor and Manager actions. The **Description** tab is a read-only tab where you can view the attack and signature details. 1. On the **Attack Definitions** tab, double-click on the row of the attack that you want to configure and update the settings. The attack details are displayed on the right panel displaying the settings under the **Settings** tab. **Settings tab**![Settings tab](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-287e5dff-06b5-2a98-ac9d-5850689ab533(7).png?sv=2026-02-06&spr=https&st=2026-11-20T11%3A08%3A33Z&se=2026-11-20T12%3A08%3A33Z&sr=c&sp=r&sig=s6gyUtnDmFPvCQWGU2abzc99hOfYmwl2lzGMGJkxiok%3D) 2. Configure the settings for the attack definitions The following fields are displayed for attacks of categories such as exploit, policy violation, malware, and reconnaissance: | Option | Definition | | --- | --- | | **State** | Select any following options: - **Inherit (Enabled)** - **Enabled** - **Disabled** | | **Severity** | Select the severity level of the attack: - **Inherit (Medium - 5)** - **Info - 0** - **Low - 1** - **Low - 2** - **Low - 3** - **Medium - 4** - **Medium - 5** - **Medium - 6** - **High - 7** - **High - 8** - **High - 9** | | **Threshold** | This field is displayed only configuring attacks of type DoS Threshold and Reconnaissance Correlation attacks. Select the severity level of the attack: - **Inherit** - **Set explicitly** > [!NOTE] > Note > > If you select the option **Set explicitly**, specify the threshold value in the number field. | | **Interval** | This field is displayed only configuring attacks of type DoS Threshold and Reconnaissance Correlation attacks. Select the interval duration: - **Inherit** - **Set explicitly** > [!NOTE] > Note > > If you select the option **Set explicitly**, specify the interval duration seconds in the number field. | | **Sensor Actions** | | **Response** | | | **Block** | Select any of the following blocking options: - **Inherit (Disabled)** - **Enable Blocking** - **Enable SmartBlocking** - **Disabled** | | **Quarantine** | Select any of the following quarantine options: - **Inherit (Disabled)** - **Quarantine Attacker** - **Quarantine and Remediate** - **Attacker** - **Disabled** | | **TCP Reset** | Select any of the following TCP reset options: - **Inherit (Disbaled)** - **Reset Src** - resets to the source. - **Reset Dest** - resets to the destination. - **Reset Src and Dest** - resets to the source and destination. - **Disabled** | | **ICMP Message** | Select any of the following ICMP message options: - **Inherit (Disabled)** - **Send ICMP Host Unreachable to Src** - **Disabled** | | **Alert** | Select any of the following alert options: - **Inherit (Send Alert to Manager)** - **Send Alert to Manager** - **Disabled** | | **Alert Suppression Timer** | This field is displayed only configuring Sensor response for attacks of type Reconnaissance Correlation attacks. Select the severity level of the attack: - **Inherit** - **Set explicitly** > [!NOTE] > Note > > If you select the option **Set explicitly**, specify the seconds in the number field. | | **Capture Packets** | | **Attack and Pre-Attack** | Select any of the following pre-attack packet capture options: - **Inherit (Attack and Prior 128 Bytes)** - **Attack and Prior 128 Bytes** - **Disabled** > [!NOTE] > Note > > If you include both HTTP and HTTP2 packets, it will be 256 bytes. | | **Post-Attack** | Select any of the following post-attack packet capture options: - **Inherit (Disabled)** - **Enabled** - **Disabled** | | **Flows to Capture** | This field is displayed only when you select **Post-Attack** as **Enabled**. The following are the options available in this field: - **Inherit (Attack Flow Only)** - **Attack flow only** By selecting the option Attack flow only, a new drop-down list is displayed. Select any of the following options: - **Attack Packets only** - **Next N packets** - type the number of packets in the blank **packets** field. - **Next N time** - select the time options from the given drop-down list. The options are: - **Seconds** - **Minutes** - **Hours** - **Days** - **Rest of flow** - **Flows from Src and Flows to Src and Dest** By selecting the option **Flows from Src and Flows to Src and Dest**, a new drop-down list is displayed. Select any of the following options: - **Next N packets** - type the number of packets in the blank **packets** field. - **Next N time** - select the time options from the given drop-down list. The options are: - **Seconds** - **Minutes** - **Hours** - **Days** | | **Bytes to Capture** | This field is displayed only when you select **Post-Attack** as **Enabled**. The following are the options available in this field: - **Inherit (All Bytes in Each Packet)** - **All Bytes in Each Packet** - **First N Bytes in Each Packet** By selecting the option **First N Bytes in Each Packet** , a new field to enter the number of bytes to capture is displayed. Type the number in the blank field. | | **Manager actions** | | **Syslog** | Select any of the following syslog options: - **Inherit (Disabled)** - **Send Syslog Message** - **Disabled** | | **SNMP** | Select any of the following SNMP options: - **Inherit (Disabled)** - **Send SNMP Trap** - **Disabled** | | **E-Mail** | Select any of the following email options: - **Inherit (Disabled)** - **Send E-Mail Message** - **Disabled** | | **Pager** | Select any of the following pager options: - **Inherit (Disabled)** - **Send Page** - **Disabled** | | **Script** | Select any of the following script options: - **Inherit (Disabled)** - **Run Script** - **Disabled** | | **Auto-Acknowledge Alert** | Select any of the following auto-acknowledgment options: - **Inherit (Disabled)** - **Auto-Acknowledge Alert** - **Disabled** | | **Update** | Click here to update the settings. | Fields in the **Capture Packets** and **Manager actions** sections are displayed only when alerting (**Alert** field option) is enabled or inherited. From 11.1 Minor 6 release onwards, the fields in the **Capture Packets** section (for both **Attack and Pre-Attack** and **Post-Attack**) is set to disabled by default for all attacks of **Informational** and **low (1)** severity levels, and not available for configuration for some specific attack IDs. This is done to prevent certain scenarios of excessive packet log generation. > [!NOTE] > Note > > If you are running a Manager version lower than 11.1 Minor 6 release in which the packet logging is already enabled for any of the specific attack IDs (either inherit-enabled by signature set or manually enabled by the user) and you perform an upgrade, the fields in the **Capture Packets** section will still be visible during attack details configuration. The fields in the **Sensor actions** section is not displayed for malware attack definitions that support advanced malware policies as these settings are configured in the malware policy. However, the Manager actions are configurable for such malware attacks. Note the following if you want to configure and update the settings of any SmartVision attack: - The **Block** and **Quarantine** fields are disabled by signature set and not available for configuration for the attack IDs related to SmartVision attacks in the Manager. - The packet logging option is disabled in signature set for SmartVision attacks. As a result, the **Capture Packets** section (for both **Attack and Pre-Attack** and **Post-Attack**) is not available for configuration for SmartVision attacks in the Manager. > [!NOTE] > Note > > If you are using a Manager running on version older than 11.1 Update 7 release and using a signature set that includes SmartVision attack rules, the **Capture Packets** section will still be visible during attack details configuration for the related attack IDs. > > For more information, see [Working with SmartVision Attacks](/network-and-platform/docs/working-with-smartvision-attacks-2). The following table explains the various Sensor responses that can be performed for different type of attacks. **Yes** signifies that the Sensor response can be performed for the attack type. **No** signifies that the Sensor response cannot be performed for the attack type. **Sensor responses for attack types** | Sensor response | Exploit | DoS Learning | DoS Threshold | Reconnaissance Signature | Policy Violation | Malware | Reconnaissance Correlation | | --- | --- | --- | --- | --- | --- | --- | --- | | **Block** | Yes | Yes | No | Yes | Yes | Yes | No | | **Quarantine** | Yes | No | No | Yes | Yes | Yes | Yes | | **TCP Reset** | Yes | No | No | Yes | Yes | Yes | No | | **ICMP Message** | Yes | No | No | Yes | Yes | Yes | No | | **Alert** | Yes | Yes | Yes | Yes | Yes | Yes | No | | **Capture packets** | Yes | No | No | Yes | Yes | Yes | No | | **Alert Suppression Timer** | No | No | No | No | No | No | Yes |