--- title: "Configure device profiling at interface level" slug: "configure-device-profiling-at-interface-level-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:51Z published: 2026-11-19T12:30:51Z canonical: "docs.trellix.com/configure-device-profiling-at-interface-level-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure device profiling at interface level You can configure device profiling at the interface level as follows: 1. Navigate to **Policy** → **** → **Intrusion Prevention** → **Policy Manager**. 2. On the **Interfaces** tab, double-click on the interface to which you would like to enable device profiling. The **** panel opens. 3. In the **Inspection Options** section, select the policy from the **Policy** drop-down list. To create a new policy, click the ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a265d0b5-4039-16f5-7bb1-cb4512697e13(8).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A56%3A33Z&se=2026-11-20T13%3A56%3A33Z&sr=c&sp=r&sig=Pk5Ox%2Fj2S80qXVIpPFxM%2BDzzsw1sNBV0Dyf28f13WCo%3D) icon or click the ![GUID-6E2D5582-3868-4FBA-BA20-20A3995E8669-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-4f159cfa-68ca-d13f-1bc3-b7999c42d5c5(12).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A56%3A33Z&se=2026-11-20T13%3A56%3A33Z&sr=c&sp=r&sig=Pk5Ox%2Fj2S80qXVIpPFxM%2BDzzsw1sNBV0Dyf28f13WCo%3D) icon to edit an already assigned policy. If you are creating a new policy proceed to step 4. If you are editing an existing policy proceed to step 5. 4. The **Properties** page opens. Enter the **Name** and **Description**. Select the **Visibility** and click **Next**. The **Inspection Options** page opens. ![device_profiling_at_interface_level.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1477e2d3-e11a-2ac6-e938-6d36c68ab323(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A56%3A33Z&se=2026-11-20T13%3A56%3A33Z&sr=c&sp=r&sig=Pk5Ox%2Fj2S80qXVIpPFxM%2BDzzsw1sNBV0Dyf28f13WCo%3D) 5. On the **Traffic Inspection** tab, under **Miscellaneous**, enable **Passive Device Profiling** in the required direction. 6. Click **Save** in the **Inspection Options** page. 7. To save the configuration changes, click **Save** in the **** panel.