--- title: "Configure device profiling at interface level" slug: "configure-device-profiling-at-interface-level" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:36Z published: 2026-10-05T15:40:36Z canonical: "docs.trellix.com/configure-device-profiling-at-interface-level" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure device profiling at interface level You can configure device profiling at the interface level as follows: ## Task 1. Navigate to **Policy** → **** → **Intrusion Prevention** → **Policy Manager**. 2. On the **Interfaces** tab, double-click on the interface to which you would like to enable device profiling. The **** panel opens. 3. In the **Inspection Options** section, select the policy from the **Policy** drop-down list. To create a new policy, click the ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A30%3A32Z&se=2026-11-22T16%3A30%3A32Z&sr=c&sp=r&sig=%2FrpIsme838sV8y2Z1v7dSn7SccPOJZAwIXByC%2FrixgE%3D) icon or click the ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-6E2D5582-3868-4FBA-BA20-20A3995E8669-low(1).png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A30%3A32Z&se=2026-11-22T16%3A30%3A32Z&sr=c&sp=r&sig=%2FrpIsme838sV8y2Z1v7dSn7SccPOJZAwIXByC%2FrixgE%3D) icon to edit an already assigned policy. If you are creating a new policy proceed to step 4. If you are editing an existing policy proceed to step 5. 4. The **Properties** page opens. Enter the **Name** and **Description**. Select the **Visibility** and click **Next**. The **Inspection Options** page opens. Passive Device Profiling per interface ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-94148FE4-1449-44BA-AE36-084DB61F2F67-low.png?sv=2026-02-06&spr=https&st=2026-11-22T15%3A30%3A32Z&se=2026-11-22T16%3A30%3A32Z&sr=c&sp=r&sig=%2FrpIsme838sV8y2Z1v7dSn7SccPOJZAwIXByC%2FrixgE%3D) 5. On the **Traffic Inspection** tab, under **Miscellaneous**, enable **Passive Device Profiling** in the required direction. 6. Click **Save** in the **Inspection Options** page. 7. To save the configuration changes, click **Save** in the **** panel.