--- title: "Configure email or pager alert notifications" slug: "configure-email-or-pager-alert-notifications-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:36Z published: 2026-11-19T12:30:36Z canonical: "docs.trellix.com/configure-email-or-pager-alert-notifications-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure email or pager alert notifications You must identify a mail server for email notifications in the **E-mail** page (**Manager** → **** → **Setup** → **Notification** → **IPS Events** → **E-mail**). Users can be alerted by email or pager when an alert is generated that matches a chosen severity or customized attack setting. The procedure for configuring email alerts is described here. The procedure for configuring pager is similar. 1. Select **Manager** → **** → **Setup** → **Notification** → **IPS Events** → **E-mail**. The **E-Mail** and **Recipient List** information is displayed under the **E-mail** tab. ![GUID-65593956-F330-4898-879C-2A8A6195B48C-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-09c11492-a927-580f-07a7-4c77ff68c240(7).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A56%3A56Z&se=2026-11-20T14%3A56%3A56Z&sr=c&sp=r&sig=Da%2Ffiuowk2qCsEu%2FcTETspG1w2BGh8XRyT3NyqpLxFA%3D) 2. Specify your options in the corresponding fields. | Field | Description | | --- | --- | | **Enable E-mail Notification** | Select **Yes** to enable alert notification through email. | | **Send Notification If** | **The attack definition has this notification option explicitly enabled** — Send notification for attacks that match customized policy notification settings, which you must set when editing attack responses within the policy editor. **The following notification filter is matched** — Send notification based on the following filters: - **Severity Informational and above** — Includes all alerts - **Severity Low and above** — Includes low, medium, and high severity alerts - **Severity Medium and above** — Includes both medium and high severity alerts - **Severity High** — Includes only high severity alerts The table below explains the functional interdependency of the two options. | | **Suppression Time** | Type a **Suppression Time** for the notification. The suppression time is the duration (minutes and seconds) to wait after an alert notification has been sent before sending another alert notification. The default and minimum value is 10 minutes and 0 seconds. Suppression time is useful to avoid sending excessive notifications when there is heavy attack traffic. | | **Message Body** | The *message body* is a preset response sent with the notification with information pertaining to the alert. **System Default** — The system default message provides the notified admin with the most basic attack details so that an immediate response can be made. Details include the attack name, time detected, attack type, severity, the Sensor interface where detected, and the source and/or destination IP addresses. > [!NOTE] > Note > > You cannot edit the **System Default** message. **Customized** — Select **Customized** against **Message Body** and click **Edit** to view the **Custom Message** page. You can type custom text in the **Subject** field or **Body** section, as well as click one or more of the provided variable links at **Subject Line Variables** or **Content-Specific Variables**. > [!NOTE] > Note > > Prior to Sensor software version 10.1.5.116, the variables $IV_MALWARE_FILE_SHA1_HASH$ and $IV_MALWARE_FILE_SHA256_HASH$ do not display the file hashes. | | **Notification option explicitly enabled** | **Notification filter is matched** | **Functionality** | | --- | --- | --- | | ✔ | | Emails are sent only for the attacks where the notification option is enabled. | | | ✔ | Emails are sent only when the defined severity level is matched and the notification option is disabled. | | ✔ | ✔ | If the attack matches at least one of the criteria, an email is sent. | 3. Click **Save** to return to the email or pager notification settings page. 4. Click ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-a265d0b5-4039-16f5-7bb1-cb4512697e13(8).png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A56%3A56Z&se=2026-11-20T14%3A56%3A56Z&sr=c&sp=r&sig=Da%2Ffiuowk2qCsEu%2FcTETspG1w2BGh8XRyT3NyqpLxFA%3D) in the **Recipient List** section of the **E-mail** page. The **Add a Recipient** page is displayed. 5. Enter the Recipient email address in the **SMTP Address** field and click **Save**. The email address is listed under the **Recipient List** on the **E-mail** tab. - You can configure pager settings using a similar procedure in the **Pager** page. Select **Manager** → **** → **Setup** → **Notification** → **IPS Events** → **Pager** to view the **Pager** page. - Email and pager notifications are configured per admin domain.