--- title: "Configure Endpoint Reputation for an interface" slug: "configure-endpoint-reputation-for-an-interface-3" tags: ["Integration", "IPS 11.1.x"] updated: 2026-11-19T12:53:55Z published: 2026-11-19T12:53:55Z canonical: "docs.trellix.com/configure-endpoint-reputation-for-an-interface-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure Endpoint Reputation for an interface You must enable Endpoint Reputation at the interface level for the Sensor to perform IP address lookups. At the interface level, you can inherit the settings from the admin domain or customize it for the interface. **Steps:** 1. In the Manager, select **Policy** → **** → **Intrusion Prevention** → **Policy Manager**. 2. Double-click the interface for which you want to configure Endpoint Reputation. A **** panel appears for the selected interface. 3. In the **Inspection Options** section of the **** panel, select the Endpoint Reputation policy you want from the **Policy** drop down list. To create a new policy, click the ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72053356-4c05-0f24-325f-27e024879a39(2).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A46Z&se=2026-11-20T13%3A00%3A46Z&sr=c&sp=r&sig=oqNnauCsOTqj508NfD28%2FwdXzYbymJvYB6nC2NJ4F0M%3D) icon or double click on the policy to edit an already assigned policy. 4. Click the ![GUID-E7BA235E-C8E9-494B-A481-32F301FEAAB8-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-72053356-4c05-0f24-325f-27e024879a39(2).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A46Z&se=2026-11-20T13%3A00%3A46Z&sr=c&sp=r&sig=oqNnauCsOTqj508NfD28%2FwdXzYbymJvYB6nC2NJ4F0M%3D) icon. The **Properties** tab for a new policy appears. 5. Enter the **Name** and **Description**, select the **Visibility**, and click **Next**. The page shifts to open the **Inspection Options** tab. 6. Click the **GTI Reputation Services** tab and the **Endpoint** sub-tab opens. 7. Enable **Endpoint Reputation Analysis** in the required direction. ![GUID-752AFF84-62D5-478A-96D7-8AF335A70C65-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-941be20a-fc0a-90db-9cc4-ab9a12649fe6(1).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A46Z&se=2026-11-20T13%3A00%3A46Z&sr=c&sp=r&sig=oqNnauCsOTqj508NfD28%2FwdXzYbymJvYB6nC2NJ4F0M%3D) If the outbound connection is enabled, the reputation of the destination IP address is identified. If the inbound direction is enabled, the reputation of the source IP address is identified. 8. Specify the Endpoint Reputation options in the corresponding fields. ![GUID-76C5E838-D446-484C-AC88-40B4215AAB85-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-07adc659-3f6d-9a27-1b7e-36c33c92c844(1).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A00%3A46Z&se=2026-11-20T13%3A00%3A46Z&sr=c&sp=r&sig=oqNnauCsOTqj508NfD28%2FwdXzYbymJvYB6nC2NJ4F0M%3D) | Option | Definition | | --- | --- | | **Endpoint Reputation Analysis** | Select any of the following options: - **Disabled** - **Inbound only** - **Outbound only** - **Inbound and Outbound** | | **Use Endpoint Reputation to Influence SmartBlocking** | Enable to enhance the blocking of an attack by a high-risk host. | | **Exclude Internal Endpoints from GTI Lookups** | Enable to exclude all the internal hosts from Reputation Lookups based on their IP addresses. | | **CIDRs Excluded from Endpoint Reputation Lookups** | List of IPv4 networks that are excluded from Reputation Lookup. - **New CIDR** — Click to add an IPv4 network. After you enter the network address and the CIDR notation, click **Add**. - Delete — Hover over the network you want to delete and click the "x" icon to delete the network. > [!NOTE] > Note > > For the IP addresses specified the exclusion list, the entire flow is marked as exclusion list irrespective of the direction of the flow. | | **Protocols Excluded from Endpoint Reputation Lookups** | Create the exclusion list for Reputation Lookup based on protocols. When a protocol is added, the Sensor does not perform Reputation Lookup with respect to the corresponding flow. - **Available Protocols** — Select the protocol to be excluded from the drop down list and click **Add**. - Delete — Hover over the protocol you want to delete and click the "x" icon to delete the protocol. | | **Save** | Saves the Endpoint Reputation Lookup configuration. | | **Cancel** | Cancels the configuration process and exits the page. | 9. Click **Save** in the **** panel to save the configuration changes. 10. Do a configuration update for the corresponding Sensor.