--- title: "Configure policy violation alert throttling for IPS devices" slug: "configure-policy-violation-alert-throttling-for-ips-devices-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/configure-policy-violation-alert-throttling-for-ips-devices-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure policy violation alert throttling for IPS devices To manage alert noise, you can enable or disable the throttling of policy violation alerts for IPS devices. This helps you focus on high-priority alerts and make a decision whether NDR has to suppress or retains alerts based on the criticality of the target asset. ### Enable/Disable alert throttling using CLI 1. Log into the NDR CLI using a terminal window or SSH client: 1. Using the SSH protocol, log into the appliance with management interface's IP address or hostname. ``` $ ssh npadmin@ ``` 2. Enter the password when prompted. The `hostname > prompt` is displayed after you have logged in. 2. Enter privileged mode on the NDR CLI. ``` npadmin@hostname> enable ``` 3. Enter the `npadmin` password, when prompted. The password can be 5 to 24 characters long. ``` [sudo] password for npadmin: ``` 4. Enter configuration mode. ``` npadmin@hostname# configure system ``` The prompt changes to `npadmin@hostname(config)#` on the terminal indicating that the configuration mode is enabled. 5. Type `policy-violation-alert-throttling` at the terminal and press `Enter`. The Configure policy violation alert throttling options are displayed. 6. Based on your needs, enable or disable throttling. - **If you enable throttling (default)**: All policy violation alerts gets suppressed for non-critical assets but continues to show up for critical assets. This is the recommended setting for reducing alert noise. - **If you disable throttling**: All policy violation alerts from the IPS device is displayed, regardless of the target asset's criticality. 7. Type `X` to save the configuration and exit.