--- title: "Configure RADIUS and TACACS+ authentication" slug: "configure-radius-and-tacacs-authentication-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:23:23Z published: 2026-11-17T09:23:23Z canonical: "docs.trellix.com/configure-radius-and-tacacs-authentication-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure RADIUS and TACACS+ authentication The configuration process for TACACS+ and RADIUS servers for authentication is similar. This section explains how to choose and configure these authentication methods on the CLI. **Prerequisites:** You must have - - RADIUS and TACACS+ server(s) configured to authorize users - Users configured on the respective servers - Access to the shared secret key configured on the respective server(s) 1. Log in to the system as `npadmin` using the system's IP address or FQDN. For example: `$ ssh npadmin@10.1.0.1` Or, `$ ssh npadmin@exampleFQDN` 2. Enter privileged mode: `npadmin@hostname > enable` 3. Enter the admin password. `[sudo] password for npadmin: <password>` 4. Enter configuration mode: `npadmin@hostname# configure system` 5. Open the authentication configuration: ```plaintext npadmin@hostname(config)# authentication 1: Authentication Method = pam 2: Configure Current Authentication Method ----------------------------------------         Q: Save changes and exit C: Cancel changes and exit         Select which option you would like to change using the index number: ``` 6. Type `1` to open the authentication mechanism menu. When the menu appears, Enter `3` for RADIUS or `4` for TACACS+. ```plaintext Authentication Mechanisms: 1: PAM 2: LDAP 3: RADIUS 4: TACACS+ 5: Active Directory 6: PKI 7: PKI w/ LDAP 8: PKI w/ Active Directory C: Cancel changes and exit Select the authentication method to use: ``` When you have selected PKI or PKI w/ LDAP or PKI w/ Active Directory as the authentication method, the following options appear in the CLI: ```plaintext 1: Authentication Method = pki-ldap 2: Configure Current Authentication Method 3: Flush AD/LDAP passwd and group cache ---------------------------------------- Q: Save changes and exit C: Cancel changes and exit Select which option you would like to change using the index number: ``` 7. Press `2` to select `Configure Current Authentication Method`. When the configuration menu appears, make changes to the following fields, as required: 1. `RADIUS/TACACS+ Server(s)`: Enter `1` to enter a space-separated list of servers to authenticate against in format. > [!NOTE] > Note > > Only IP addresses are permitted for TACACS+ or RADIUS servers. DNS hostnames are not supported. 2. `Shared Secret`: Enter `2` to provide the shared secret key configured on the server for communication. 3. `RADIUS/TACACS+ Timeout`: Enter `3` to configure the server timeout in seconds. - For TACACS+, allowed value range is 0 - 60 - For RADIUS, allowed value range is 0 - 255 Enter `Q` to save the settings and exit the menu, or `C` to cancel. 8. See [adding a user](/network-and-platform/docs/adding-a-user-in-the-cli-2) to create remote user(s) for RADIUS/TACACS authentication.